✦ LIBER ✦

Application of FDTD method to conformal patch antennas

✍ Scribed by Yu, W.; Farahat, N.; Mittra, R.

Book ID: 114455133
Publisher: The Institution of Electrical Engineers
Year: 2001
Tongue: English
Weight: 407 KB
Volume: 148
Category: Article
ISSN: 1350-2417
DOI: 10.1049/ip-map:20010501

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Rigorous analysis of conformal microstri

Rigorous analysis of conformal microstrip patch antennas using the FDTD method

✍ Mohamed El Brak; Mohamed Essaaidi 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 120 KB 👁 1 views

## Abstract This paper investigates the characteristics of conformal microstrip patch antennas using the rigorous FDTD approach based on a rectangular mesh and a staircase discretization scheme for the curved regions. It is shown that the conformal shape of microstrip patch antennas can be used as

Accurate modeling of shorted microstrip

Accurate modeling of shorted microstrip patch antennas using the locally conformal FDTD method

✍ Jun-Hai Cui; Shun-Shi Zhong; Chun Yu 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 117 KB 👁 1 views

## Abstract An accurate analysis of shorted microstrip patch antennas is presented based on the use of the locally conformal finite‐difference time‐domain (CFDTD) method. This approach enables the positions and dimensions of the probe and the shorting pin to be chosen independently. The calculated

FDTD method applied to the study of rada

FDTD method applied to the study of radar cross section of microstrip patch antennas

✍ Alain Reineix; Jean Paillol; Bernard Jecko 📂 Article 📅 1993 🏛 Springer-Verlag 🌐 English ⚖ 469 KB

Matched load truncation for feedline of

Matched load truncation for feedline of patch antennas in the FDTD method

✍ Hany E. Abd El-Raouf; Wenhua Yu; Nader Farahat; Raj Mittra 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 147 KB 👁 1 views

## Abstract In this paper, a matched load termination of a finite‐length line is used to represent an infinite feedline structure in FDTD simulations. A generator with an internal resistor—which is matched to the input port—is employed to excite the feedline, with a view to achieving a low reflecti

The FDTD method applied to the study of

The FDTD method applied to the study of mjcrostrip patch antennas with a biased ferrite substrate

✍ Alain Reineix; Christian Melon; Thierry MonÉdiÈre; Françoise Jecko 📂 Article 📅 1994 🏛 Springer-Verlag 🌐 English ⚖ 426 KB

Direct application of the S24 FDTD metho

Direct application of the S24 FDTD method to antenna pattern computation

✍ Wei-Yang Wu; Chin-Wen Kuo 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 129 KB 👁 1 views

## Abstract Directly applying the higher‐order FDTD method to the computation of antenna patterns has not been a practical approach thus far. One of the main difficulties is how to handle the perfect electric conductor (PEC), which is always present. This paper describes a procedure for handling th