𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Application of a simple and efficient source excitation technique to the FDTD analysis of waveguide and microstrip circuits

✍ Scribed by An Ping Zhao; Raisanen, A.V.

Book ID
114552731
Publisher
IEEE
Year
1996
Tongue
English
Weight
570 KB
Volume
44
Category
Article
ISSN
0018-9480

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

A bandpass source technique for the FDTD
A bandpass source technique for the FDTD analysis of waveguide discontinuity
✍ Zhiyuan Yu 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 115 KB 👁 2 views

Bilayers comprising two matched layers of dielectric thin-( ) film helicoidal bianisotropic mediums TFHBMs with opposite structural handedness can be designed to almost perfectly reflect arbitrarily polarized normally incident plane wa¨es at certain frequencies. TFHBM bilayers can therefore ser¨e as

Full-wave FDTD design and analysis of wi
Full-wave FDTD design and analysis of wideband microstrip-to-waveguide transitions
✍ Càndid Reig; Enrique A. Navarro; Vicente Such 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 102 KB

## Abstract Wideband transitions are designed and analysed by using two different approaches of the finite‐difference time‐domain (FDTD) method, in combination with the theory of nonuniform transmission lines. These transitions consist of a ridged waveguide‐based taper between a shielded microstrip

Investigation of the performance of the
Investigation of the performance of the resistive voltage source used for the FDTD analysis of microstrip circuits
✍ An Ping Zhao; Petteri Alinikula 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 157 KB 👁 1 views

## Abstract In this paper, the performance of the resistive voltage source (RVS) model used for the FDTD analysis of microstrip circuits is evaluated. It is found that, when the actual physical impedance of a microstrip line is used for assigning a constant value of __R~s~__ into the corresponding

Application of an internal resistive sou
Application of an internal resistive source modeling for the FDTD analysis of CPW and CPS circuits
✍ Kyu-Sung Kim; Jeong-Keun Ji; Jaehoon Choi 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 140 KB 👁 2 views

The finite-difference time-domain method FDTD is widely applied for the analysis of ¨arious microwa¨e circuits. In this letter, an important aspect of an internal resisti¨e source modeling is emphasized for reducing the number of time steps required for the FDTD calculation to con¨erge, especially f

Analysis of frequency division in micros
Analysis of frequency division in microstrip circuits by using the FDTD method
✍ Oscar González; José A. Pereda; Almudena Suárez; Ana Grande; Ángel Vegas 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 419 KB 👁 1 views

## Abstract The accurate time‐domain simulation of the nonlinear dynamics of circuits containing distributed elements is of great interest. Specially at high frequencies, it is essential to consider phenomena, such as crosstalk, packaging effects, and electromagnetic interaction between active and