The creep response of a hypereutectic Al-Si alloy containing 4% Cu and 0.55% Mg was investigated between 553 and 653 K. Minimum creep rate as a function of applied stress by using the power-law equation suggested the existence of two different regimes: a low-stress regime characterised by a stress e
Analysis of the effect of Si content on the creep response of an Mg–5Al–Mn alloy
✍ Scribed by E. Evangelista; S. Spigarelli; M. Cabibbo; C. Scalabroni; O. Lohne; P. Ulseth
- Publisher
- Elsevier Science
- Year
- 2005
- Tongue
- English
- Weight
- 273 KB
- Volume
- 410-411
- Category
- Article
- ISSN
- 0921-5093
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
The effect of iron on the precipitation of a technical Al-Mg-Si alloy was studied by macroand microhardness, Y-modulus and SANS with D K D and was coinpared with a pure alloy. The iron phases of the technical alloy were preferentially considered by the SANS. I n addition the daniping by the elastoma
The influence of precipitation hardening on the characteristics of serrated yielding in an Al-IMg-Si alloy has been investigated. The critical strain at the onset of serrated yielding was increased by ageing and for ageing times longer than 6 hr at 180°C serrated yielding was not observed. The strai