An Integrated Model of a Fixture-Workpiece System for Surface Quality Prediction
โ Scribed by Y.G. Liao; S.J. Hu
- Publisher
- Springer
- Year
- 2001
- Tongue
- English
- Weight
- 307 KB
- Volume
- 17
- Category
- Article
- ISSN
- 0268-3768
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
With the promulgation of more stringent regulations to guarantee that the drinking water presents minimal health risks, nanofiltration (NF) and low pressure reverse osmosis membrane (RO) processes are nowadays considered for surface water treatment. However, NF and RO spiral wound membranes are sens
Almtraet--The surface quality--including residual stress, surface roughness, and work hardening--of workpieces machined by end-milling results from the cutting conditions and tool geometries. The parameters considered in the present work are the cutting speed, feed, depth of cut, tool nose radius an
This paper reports on an investigation into the development of an analytical model for the quality control of laser marking=engraving of clay tiles using a high-power diode laser (HPDL). An analytical model for the laser melting of inhomogeneous workpieces with parabolic melt pool geometry being ass
This paper outlines a physically based model developed for prediction of both arid region ยฏash ยฏoods and associated transmission loss. It is based on coupling numerical solutions of the St Venant equations and the kinematic wave equation for channel and overland ยฏow routing, respectively, with the R