✦ LIBER ✦

An experimental study on the injection molding of thermosetting polyester resin

✍ Scribed by Chang Dae Han; Kwok-Wai Lem

Publisher: Society for Plastic Engineers
Year: 1984
Tongue: English
Weight: 928 KB
Volume: 24
Category: Article
ISSN: 0032-3888
DOI: 10.1002/pen.760240705

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Theoretical and experimental studies of

Theoretical and experimental studies of anisotropic shrinkage in injection moldings of various polyesters

✍ Keehae Kwon; A. I. Isayev; K. H. Kim 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 811 KB

Experimental study on the effects of add

Experimental study on the effects of adding compression to injection molding process

✍ S. Y. Yang; M. Z. Ke 📂 Article 📅 1995 🏛 John Wiley and Sons 🌐 English ⚖ 762 KB

Experimental and theoretical study of th

Experimental and theoretical study of the injection molding of thermoplastic materials

✍ J. F. Agassant; H. Alles; S. Philipon; M. Vincent 📂 Article 📅 1988 🏛 Society for Plastic Engineers 🌐 English ⚖ 711 KB

Resin-transfer molding of natural fiber–

Resin-transfer molding of natural fiber–reinforced plastic. I. Kinetic study of an unsaturated polyester resin containing an inhibitor and various promoters

✍ David Rouison; Mohini Sain; Michel Couturier 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 128 KB 👁 2 views

The spiral flow analysis on the injectio

The spiral flow analysis on the injection molding of alumina powder — An experimental design

✍ K.C. Hsu; P.C. Tsai 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 577 KB

Chemorheology of thermosetting resins. I

Chemorheology of thermosetting resins. II. Effect of particulates on the chemorheology and curing kinetics of unsaturated polyester resin

✍ Kwok-Wai Lem; Chang Dae Han 📂 Article 📅 1983 🏛 John Wiley and Sons 🌐 English ⚖ 855 KB

## Abstract The effect of particulates on both the rheological properties during cure and the curing kinetics of unsaturated resin has been investigated. For the investigation, a general‐purpose unsaturated polyester resin was used, with calcium carbonate and clay as inorganic particulates and high