An experimental and computational study of HY-100 steel three-point bend fracture specimens was performed. Two specimens were considered in the experimental portion of the study, differing with respect to thickness and the presence of side grooves. Plane stress and plane strain finite element analys
An experimental and computational investigation of crack initiation and stable crack growth of ductile materials
β Scribed by G.P. Zhu; G.M.C. Lee; A.A. Mufti
- Publisher
- Elsevier Science
- Year
- 1993
- Tongue
- English
- Weight
- 520 KB
- Volume
- 13
- Category
- Article
- ISSN
- 0168-874X
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
The behavior of specimens with holes that were coldworked by radial expansion was studied. The initiation and growth of fatigue cracks was observed for a remote cyclic loading that generated stresses at the hole edge slightly above the yield stress. Coldworking affected the growth rate, not the init
In this paper the general approximate method is used for calculating the stress intensity factor of the 9th grade disk of 31-25-2 type steam turbine with a radial crack in the corner of the key-slot and the fracture toughness of the material of the disk 34CrNi3Mo steel is determined. The K,< obtaine
Experimental pressure histories, axial and circumferential strains, and crack-opening shapes were compared with the predictions of a simplified model of a fracturing pipe. This model, based upon previous analytical and numerical studies. assumed that the axial strains were negligible. The comparison