An experimental study of fatigue crack initiation and growth from coldworked holes
โ Scribed by Nopporn Chandawanich; William N. Sharpe Jr.
- Publisher
- Elsevier Science
- Year
- 1979
- Tongue
- English
- Weight
- 714 KB
- Volume
- 11
- Category
- Article
- ISSN
- 0013-7944
No coin nor oath required. For personal study only.
โฆ Synopsis
The behavior of specimens with holes that were coldworked by radial expansion was studied. The initiation and growth of fatigue cracks was observed for a remote cyclic loading that generated stresses at the hole edge slightly above the yield stress. Coldworking affected the growth rate, not the initiation. Strains near the hole were measured with the mo~ technique and used to predict the initiation of cracks in the noncoidworked specimens with reasonable accuracy. Stress intensity factors computed with a linear elastic superposition procedure compared favorably with those measured by crack growth and displacement techniques for cracks longer than I mm.
๐ SIMILAR VOLUMES
Abe&act
An experimental and computational study of HY-100 steel three-point bend fracture specimens was performed. Two specimens were considered in the experimental portion of the study, differing with respect to thickness and the presence of side grooves. Plane stress and plane strain finite element analys
In the early stage of creep crack growth, low alloy steels exhibit a transitory behavior by which the expression for the crack growth rate (da/dt or ci) as a function either of the C\* integral or of the load line displacement rate (6) becomes anomalous: the data deviate from the linearity describin
Cyclic compressive fatigue tests were performed on double-edge-notched specimens of a medium carbon low alloy steel for different stress amplitude under constant mean stress and different mean stress under constant stress amplitude. The crack growth rate, the length of the arrested crack and the sha