Amorphous phase formation in plasma-sprayed hydroxyapatite coatings

✍ Scribed by Gross, K. A. ;Berndt, C. C. ;Herman, H.

• Publisher: John Wiley and Sons
• Year: 1998
• Tongue: English
• Weight: 443 KB
• Volume: 39
• Category: Article
• ISSN: 0021-9304
• DOI: 10.1002/(sici)1097-4636(19980305)39:3<407::aid-jbm9>3.0.co;2-n

✦ Synopsis

The amorphous phase content of air plasmasprayed hydroxyapatite coatings is dependent upon spraying and deposition conditions. X-ray diffraction and optical microscopy were used to investigate the influence of spray parameters on the formation of the amorphous phase. Results show three factors which most influence the formation of the amorphous phase: dehydroxylation of the molten particle during flight, the cooling rate as it impinges onto the metal substrate, and the substrate temperature. Crystalline regions were identified as unmelted particles and elongated recrystallized areas. Amorphous phase regions vary throughout the coating but are more commonly found at the coating-substrate interface, i.e., the regions decrease toward the surface of the coating. Such an inhomogeneous distribution of phase content is expected to affect the clinical process of bone deposition, and therefore successful implant fixation.