𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Aging properties and mechanism of the modified asphalt by packaging waste polyethylene and waste rubber powder

✍ Scribed by Changqing Fang; Caixia Wu; Ruien Yu; Zengping Zhang; Min Zhang; Shisheng Zhou


Book ID
112167751
Publisher
John Wiley and Sons
Year
2012
Tongue
English
Weight
233 KB
Volume
24
Category
Article
ISSN
1042-7147

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Mechanical and dynamic mechanical proper
✍ J. I. Kim; S. H. Ryu; Y. W. Chang πŸ“‚ Article πŸ“… 2000 πŸ› John Wiley and Sons 🌐 English βš– 310 KB πŸ‘ 1 views

Mechanical and dynamic mechanical properties of a waste rubber powderfilled high-density polyethylene (HDPE) composite are investigated. Rubber powder is surface-modified with acrylamide (AAm) using ultraviolet. Rubber powder and HDPE are extruded using a single-screw extruder and maleic anhydride-g

Preparation and mechanical properties of
✍ J. D. Wang; Y. F. Zhu; X. W. Zhou; G. Sui; J. Liang πŸ“‚ Article πŸ“… 2006 πŸ› John Wiley and Sons 🌐 English βš– 221 KB πŸ‘ 2 views

## Abstract A suspension of carbon nanotubes in natural latex was obtained by liquid mixing and then was used to prepare powder natural rubber composites modified with carbon nanotubes by means of spray drying process. The composite powders were round‐like and fine, with an average diameter of less

The mechanical and tribological properti
✍ Dinghan Xiang; Kemei Tao πŸ“‚ Article πŸ“… 2006 πŸ› John Wiley and Sons 🌐 English βš– 613 KB

## Abstract Polytetrafluoroethylene (PTFE) composites filled with PTFE waste offer interesting combination of tribological properties and low cost. PTFE composites waste was mechanically cut and sieved into powders. PTFE composites filled with PTFE waste powders were prepared by compression molding