Improvement of the mechanical and electrical properties of waste rubber with carbon nanotubes
β Scribed by Waleed E. Mahmoud; E. H. El-Mossalamy; H. M. Arafa
- Publisher
- John Wiley and Sons
- Year
- 2011
- Tongue
- English
- Weight
- 382 KB
- Volume
- 121
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
A systematic electrical and mechanical study was carried out on styrene butadiene rubber (SBR), as a nonpolar rubber, and nitrile rubber (NBR), as a polar one blended with pure and waste polyethylene (PE), low and high density. The compatibility investigations, which were carried out by the dielectr
## Abstract A suspension of carbon nanotubes in natural latex was obtained by liquid mixing and then was used to prepare powder natural rubber composites modified with carbon nanotubes by means of spray drying process. The composite powders were roundβlike and fine, with an average diameter of less
Mechanical and dynamic mechanical properties of a waste rubber powderfilled high-density polyethylene (HDPE) composite are investigated. Rubber powder is surface-modified with acrylamide (AAm) using ultraviolet. Rubber powder and HDPE are extruded using a single-screw extruder and maleic anhydride-g