A protective coating for SiC fiber reinforced borosilicate glass‐matrix composites based on zinc borosilicate (ZBS) glass‐ceramic was developed. The coating was deposited on the composite surfaces by a simple and cost‐effective method, based on slurry dipping followed by a densification and crystall
Advanced low-activation materials. Fibre-reinforced ceramic composites
✍ Scribed by P. Fenici; H.W. Scholz
- Publisher
- Elsevier Science
- Year
- 1994
- Tongue
- English
- Weight
- 950 KB
- Volume
- 212-215
- Category
- Article
- ISSN
- 0022-3115
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract The flexural creep and creep strain recovery behaviour during creep‐fatigue tests of a cross‐ply SiC fibre reinforced Barium Magnesium Aluminosilicate glass‐ceramic matrix composite was investigated at 1100°C in air. Only heat‐treated samples (1 h at 1100°C) were tested. Stress levels o
Raman spectroscopy was applied to silicon carbide/carbon continuous Ðbre-reinforced ceramic matrix composites to study the microstructure and composition changes in the Ðbres in the matrices after the consolidation of the composite at high temperatures by hot pressing, and also the stress distributi
Several panels of date palm leave (DPL) reinforced composites were fabricated using either autoclaving technique with vacuum bagging or press moulds with controlled temperature. Several fibre orientation and dimensions were tested. Two types of resins were selected. The first was a high temperature
This article presents a simulation scheme to predict the effect of fibre anisotropy on composite tensile failure strength at room and low temperatures. The simulation model combines the shear lag equation with the chain of bundles probability model to describe the composite failure behaviour. The ef