We have discovered that polypyrrole films undergo rapid and intensive bending in the solid state. Bending was induced by the reversible and anisotropic adsorption of various substances in the vapor state. The speed and direction of bending largely depended on the adsorbate used. By using this phenom
Adsorption-induced chemomechanical behavior of polypyrrole films
β Scribed by Hidenori Okuzaki; Toshio Kunugi
- Publisher
- John Wiley and Sons
- Year
- 1997
- Tongue
- English
- Weight
- 172 KB
- Volume
- 64
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
β¦ Synopsis
We have discovered that electrochemically synthesized polypyrrole films undergo quick and intensive bending in ambient air without the use of heat, ions, or an electric field. The principle of motion was based on a reversible van der Waals adsorption of water or polar organic molecules onto the film, which distinguished it from other systems owing to electrochemical doping and undoping. The motion of film largely depended on the kind of adsorbate used: water vapor molecules caused rapid bending of the film to the opposite side. In contrast, when polar organic molecules were used as an adsorbate, the bending of film occurred to the same side, namely, the direction of bending was just opposite to that observed for water vapor. On the basis of this phenomenon, we have devised a novel actuator which moves by a spontaneous rotation. Further, an experimental ''polypyrrole engine'' has been made, which used a polypyrrole belt as working substance and adsorbate as fuel. When water and iodomethane were used as the adsorbates, the belt rotated at a speed of 22 cm min 01 . α§ 1997
π SIMILAR VOLUMES
Polypyrrole films containing perchlorate were electrochemically synthesized and the bending and recovery motion of the films obtained has been investigated. It was found that the thickness of the film and ambient relative humidity (RH) were crucial to the motion of film: An increase of the film thic
The sorption-induced bending and recovery motion of PPy films containing different dopant ions have been investigated, and the interaction between water vapor and PPy was studied from sorption isotherms and kinetics. It was found that the PPy/BF 4 film exhibited the most rapid motion, and the initia
## Abstract Conducting polypyrrole electrodes were prepared by electrochemical polymerization of pyrrole on vacuumβmetallized glass substrates. These electrodes were modified by doping with a range of metal halides as dopant ions having different electronegativity. Electrochemical reduction of nitr