𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Adhesive bonding of acetylated aspen flakes Part 3: adhesion with isocyanates

✍ Scribed by J.A Youngquist; R.M Rowell

Publisher
Elsevier Science
Year
1990
Tongue
English
Weight
226 KB
Volume
10
Category
Article
ISSN
0143-7496

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Bonded joints with composite adherends.
Bonded joints with composite adherends. Part I. Effect of specimen configuration, adhesive thickness, spew fillet and adherend stiffness on fracture
✍ Abdelaziz A. Taib; Rachid Boukhili; Said Achiou; Sebastien Gordon; Hychem Boukeh πŸ“‚ Article πŸ“… 2006 πŸ› Elsevier Science 🌐 English βš– 735 KB

This paper deals with glass-fiber-reinforced vinylester composite laminates manufactured by resin infusion and bonded with an epoxy adhesive. The effect of joint configuration, adhesive layer thickness, defects, humidity, spew fillet, and adherend stiffness were investigated by means of tension test

Optimization and characterization of waf
Optimization and characterization of wafer-level adhesive bonding with patterned dry-film photoresist for 3D MEMS integration
✍ Till Huesgen; Gabriel Lenk; BjΓΆrn Albrecht; Paul Vulto; Thomas Lemke; Peter Woia πŸ“‚ Article πŸ“… 2010 πŸ› Elsevier Science 🌐 English βš– 501 KB

A wafer-level adhesive bonding process based on Ordyl SY300, an acrylic permanent dry-film photoresist, is systematically optimized and characterized. Silicon and Pyrex wafers are bonded with a structured 120 m thick layer of Ordyl. A bond yield of 95% and a tensile bond strength of 13.36 MPa are me