✦ LIBER ✦

Adhesive and cohesive properties by indentation method of plasma-sprayed hydroxyapatite coatings

✍ Scribed by Z. Mohammadi; A.A. Ziaei-Moayyed; A. Sheikh-Mehdi Mesgar

Publisher: Elsevier Science
Year: 2007
Tongue: English
Weight: 491 KB
Volume: 253
Category: Article
ISSN: 0169-4332
DOI: 10.1016/j.apsusc.2006.11.002

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Optimization of Dielectric Properties of

Optimization of Dielectric Properties of Suspension Plasma Sprayed Hydroxyapatite Coatings

✍ R. Jaworski; C. Pierlot; R. Tomaszek; L. Pawlowski; Z. Znamirowski; J. Zdanowski 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 559 KB

## Abstract Conventional plasma torch was adapted to spray very fine Ca~5~ (PO~4~)~3~OH (hydroxyapatite, HA) precursors having sizes ranging from a few hundreds of nanometers to a few micrometers. The powders were put in suspension with distilled water and antidispersive agent. A home made suspensi

Interfacial indentation test and adhesiv

Interfacial indentation test and adhesive fracture characteristics of plasma sprayed cermet Cr3C2/Ni–Cr coatings

✍ Philippe Hivart; Jacques Crampon 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 459 KB

Characteristics of hydroxyapatite coated

Characteristics of hydroxyapatite coated titanium porous coatings on Ti-6Al-4V substrates by plasma sprayed method

✍ C. Y. Yang; C. R. Chen; E. Chang; T. M. Lee 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 660 KB

## Abstract A porous metal coating applied to solid substrate implants has been shown, __in vivo__, to anchor implants by bone ingrowth. Calcium phosphate ceramics, in particular hydroxyapatite [Ca~10~(PO~4~)~6~(OH)~2~, HA], are bioactive ceramics, which are known to be biocompatible and osteocondu

Grit blasting of Ti–6Al–4V alloy: Optimi

Grit blasting of Ti–6Al–4V alloy: Optimization and its effect on adhesion strength of plasma-sprayed hydroxyapatite coatings

✍ Z. Mohammadi; A.A. Ziaei-Moayyed; A. Sheikh-Mehdi Mesgar 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 420 KB

The effect of grit blasting parameters on the surface roughness of Ti-6Al-4V alloy as the substrate for plasma-sprayed hydroxyapatite (HA) coatings was examined using the factorial and Taguchi designs of experiments. In this study, two grit materials (Al 2 O 3 and SiO 2 ) each at two sizes, and two

Evaluation of nanostructured carbonated

Evaluation of nanostructured carbonated hydroxyapatite coatings formed by a hybrid process of plasma spraying and hydrothermal synthesis

✍ Han, Yong ;Xu, Kewei ;Montay, Gillaume ;Fu, Tao ;Lu, Jian 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 771 KB

Carbonated hydroxyapatite (CHA) coatings on a titanium alloy were prepared by hydrothermal synthesis of precursors plasma-sprayed with brushite as a raw powder. The structures, residual stresses, and bond strengths of the precursors and CHA coatings were investigated. The results showed that the spr

Mechanical properties and Young's modulu

Mechanical properties and Young's modulus of plasma-sprayed hydroxyapatite coating on Ti substrate in simulated body fluid

✍ Yang, Y. C. ;Chang, Edward ;Lee, S. Y. 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 620 KB

## Abstract This study evaluated the Young's modulus, residual stress and strain, bonding strength, and microstructure of the plasma‐sprayed hydroxyapatite coating (HAC) on Ti6Al4V substrate with and without immersion in Hank's balanced salt solution (HBSS). The purpose was to explore the possible