✦ LIBER ✦

Interfacial indentation test and adhesive fracture characteristics of plasma sprayed cermet Cr3C2/Ni–Cr coatings

✍ Scribed by Philippe Hivart; Jacques Crampon

Publisher: Elsevier Science
Year: 2007
Tongue: English
Weight: 459 KB
Volume: 39
Category: Article
ISSN: 0167-6636
DOI: 10.1016/j.mechmat.2007.05.002

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Microstructure and adhesion of Cr3C2–NiC

Microstructure and adhesion of Cr3C2–NiCr vacuum plasma sprayed coatings

✍ Z. Marcano; J. Lesage; D. Chicot; G. Mesmacque; E.S. Puchi-Cabrera; M.H. Staia 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 526 KB

Vacuum plasma spraying (VPS) was used to spray a Cr 3 C 2 -NiCr coating of ∼150, 300 and 450 μm in thickness onto a plain carbon steel substrate, employing a commercially available Cr20Ni9.5C powder. The splat microstructures observed in the coating were found to consist of a NiCr matrix with a pred

Scuffing resistance of plasma and HVOF s

Scuffing resistance of plasma and HVOF sprayed WC12Co and Cr3C2-25(Ni20Cr) coatings

✍ Wojciech Żórawski; Stefan Kozerski 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 856 KB

Performance of laser-glazed plasma-spray

Performance of laser-glazed plasma-sprayed (ZrO2-12wt.%Y2O3)/(Ni-22wt.%Cr-10wt.%Al-1wt.%Y) thermal barrier coatings in cyclic oxidation tests

✍ H.L. Tsai; P.C. Tsai 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 585 KB