✦ LIBER ✦

Acoustic emission characteristics and fracture toughness of artificial graphite electrodes

✍ Scribed by Naotaka Ekinaga; Kinji Tamagawa; Hideaki Takahashi

Publisher: Elsevier Science
Year: 1991
Tongue: English
Weight: 563 KB
Volume: 7
Category: Article
ISSN: 0955-2219
DOI: 10.1016/0955-2219(91)90053-3

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Radial variations in fracture and acoust

Radial variations in fracture and acoustic emission of a thermic graphite electrode

✍ Youfa Yin; Robin G. Cooke; Brian McEnaney 📂 Article 📅 1991 🏛 Elsevier Science 🌐 English ⚖ 535 KB

an extruded electrode graphite, grain orientation increases and porosity decreases with increasing radial distance from the centre of the log. Radial variation in grain orientation is produced during the extrusion stage of manufacture. The radial porosity gradient may be influenced partly by orienta

The fracture toughness testing of cerami

The fracture toughness testing of ceramics and acoustic emission

✍ B.J. Dalgleish; P.L. Pratt; R.D. Rawlings; A. Fakhr 📂 Article 📅 1980 🏛 Elsevier Science ⚖ 845 KB

Electron emission and acoustic emission

Electron emission and acoustic emission from the fracture of graphite/epoxy composites

✍ J. T. Dickinson; A. Jahan-Latibari; L. C. Jensen 📂 Article 📅 1985 🏛 Springer 🌐 English ⚖ 555 KB

A correlation between acoustic emission

A correlation between acoustic emission and the fracture toughness of 2124-T851 aluminum

✍ M.A. Hamstad; R. Bianchetti; A.K. Mukherjee 📂 Article 📅 1977 🏛 Elsevier Science 🌐 English ⚖ 682 KB

The paper reports on an experimental study of the possible application of acoustic emission as an inspection technique, to determine whether 2124-T851 aluminum plate meets certain, minimum, fracture toughness specifications. Unllawed specimens, taken in the three principal directions, from three sep

Fracture toughness determination of conc

Fracture toughness determination of concrete by use of breakoff tester and acoustic emission technique

✍ T. Hashida; H. Takahashi; S. Kobayashi; Y. Fukugawa 📂 Article 📅 1990 🏛 Elsevier Science 🌐 English ⚖ 712 KB

The breakoff test method was developed as an in-situ testing procedure for determining the fracture toughness of concrete in a structure. The testing procedure involves breaking a notched cylindrical core that is drilled into the concrete. The breakoff tester was used to apply a load to the concrete

Correlation of the acoustic emission and

Correlation of the acoustic emission and the fracture toughness of ductile nodular cast iron

✍ S. H. Carpenter; Zuming Zhu 📂 Article 📅 1991 🏛 Springer 🌐 English ⚖ 698 KB