## Abstract Design of an ultra wide band (UWB) filter using tightly coupled lines in micro strip medium suitable for UWB communications has been presented in this paper. Coupled lines with centrally loaded open circuited stubs have been appropriately chosen to locate the two attenuation poles, clos
A stub-loaded SIR filter with an ultra-wide rejection band
✍ Scribed by Huan Wang; Qing-Xin Chu
- Publisher
- John Wiley and Sons
- Year
- 2009
- Tongue
- English
- Weight
- 250 KB
- Volume
- 51
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A stub‐loaded stepped‐impedance resonator (SIR) filter with an ultra‐wide upper stopband is proposed. For a 20‐dB rejection level, by properly choosing the number and lengths of the stubs, the second, third, and fourth resonances of the SIR filter are pushed to left and the seventh resonance is pushed to right, and all of them show low S~21~ levels due to the improper external coupling values, while the fifth and sixth resonances are greatly suppressed by a transmission zero. The measured 20‐dB rejection band of a three‐stub SIR filter achieves 17.4 times the designed frequency. © 2009 Wiley Periodicals, Inc. Microwave Opt Technol Lett 51: 2660–2662, 2009; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.24740
📜 SIMILAR VOLUMES
## Abstract An ultrawideband (UWB) bandpass filter with steeply sloped rejection is proposed in this article. The proposed filter has five transmission poles inside the passband and four transmission zeros on both side of passband. Using the even‐ and odd‐mode analysis method, closed‐form formulas
## Abstract An ultra‐wideband microstrip filter with good out‐of‐band performance is designed and demonstrated. The filter design is based on a circuit model for an optimum short‐circuited stub transmission‐line filter whose unit elements or connecting lines are nonredundant. Substituting the conne
## Abstract We present here a novel pattern with compact size of ultra‐wide band microstrip filter. The filter is originally modeled from five poles quarter‐wavelength short‐circuited stubs. It is then, transformed into a new compact butterfly‐like pattern. This new “butterfly‐shaped” pattern consi
## Abstract In this letter, a novel microstrip bandpass filter (BPF) with half asymmetric resonators is presented.With Filter structure and capacitively loaded coupling, a wide bandwidth with sufficient rejection level can be achieved easily. The electromagnetic simulation is used, and the prototyp
## Abstract In this letter, we proposed the design of novel dual‐band bandpass filter (BPF) with a broad upper rejection band using only two asymmetric stepped impedance resonators (SIRs), which has a smaller circuit size in comparison of previous works. The feature of the asymmetric SIR is only on