๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

A source model for work hardening of single crystals

โœ Scribed by V. Z. Bengus


Book ID
112659710
Publisher
Springer
Year
1981
Tongue
English
Weight
283 KB
Volume
31
Category
Article
ISSN
0011-4626

No coin nor oath required. For personal study only.


๐Ÿ“œ SIMILAR VOLUMES


Low-temperature work-hardening of cadmiu
โœ B. Welke; W. Tikvic; A. Svobodovรก; P. Lukรกcฬ† ๐Ÿ“‚ Article ๐Ÿ“… 1977 ๐Ÿ› Elsevier Science โš– 527 KB

Stress-strain curves of Cd-single crystals were measured at low temperatures down to 4.2 K. The resolved critical shear stress ro/p decreases with increasing temperature, showing a slope three to four lines larger in the interval 4.2-30 K than in the interval 30-300 K. The work-hardening coefficient

Stage B work-hardening of magnesium sing
โœ B. Suล‚kowski; R. Chulist; B. Beausir; W. Skrotzki; B. Mikuล‚owski ๐Ÿ“‚ Article ๐Ÿ“… 2011 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 242 KB

## Abstract The change in microstructure during tensile deformation of magnesium single crystals by basal slip was studied with electron backscatter diffraction in the scanning electron microscope. Two samples were plastically deformed up to shear strains of 0.37 and 1.28 belonging to workโ€hardenin

Work-hardening characteristics of Zn-Ti
โœ G. Boczkal; B. Mikulowski; C.-G. Oertel; W. Skrotzki ๐Ÿ“‚ Article ๐Ÿ“… 2010 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 131 KB

## Abstract Shear stress โ€“ shear strain curves of 0.14 at.%Ti alloyed Zn single crystals were measured in compression at different temperatures and shear strain rates. The workโ€hardening coefficient for basal slip increases with decreasing temperature and increasing shear strain rate. The workโ€hard