𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The work-hardening of anthracene single crystals

✍ Scribed by P.M Robinson

Publisher
Elsevier Science
Year
1968
Weight
801 KB
Volume
16
Category
Article
ISSN
0001-6160

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Stage B work-hardening of magnesium sing
Stage B work-hardening of magnesium single crystals
✍ B. Sułkowski; R. Chulist; B. Beausir; W. Skrotzki; B. Mikułowski 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 242 KB

## Abstract The change in microstructure during tensile deformation of magnesium single crystals by basal slip was studied with electron backscatter diffraction in the scanning electron microscope. Two samples were plastically deformed up to shear strains of 0.37 and 1.28 belonging to work‐hardenin

Low-temperature work-hardening of cadmiu
Low-temperature work-hardening of cadmium single crystals
✍ B. Welke; W. Tikvic; A. Svobodová; P. Lukác̆ 📂 Article 📅 1977 🏛 Elsevier Science ⚖ 527 KB

Stress-strain curves of Cd-single crystals were measured at low temperatures down to 4.2 K. The resolved critical shear stress ro/p decreases with increasing temperature, showing a slope three to four lines larger in the interval 4.2-30 K than in the interval 30-300 K. The work-hardening coefficient

Work-hardening characteristics of Zn-Ti
Work-hardening characteristics of Zn-Ti alloy single crystals
✍ G. Boczkal; B. Mikulowski; C.-G. Oertel; W. Skrotzki 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 131 KB

## Abstract Shear stress – shear strain curves of 0.14 at.%Ti alloyed Zn single crystals were measured in compression at different temperatures and shear strain rates. The work‐hardening coefficient for basal slip increases with decreasing temperature and increasing shear strain rate. The work‐hard