𝔖 Bobbio Scriptorium
✦   LIBER   ✦

A one-piece flat-plate dipole antenna for dual-band WLAN operation

✍ Scribed by Saou-Wen Su; Jui-Hung Chou; Yung-Tao Liu

Publisher
John Wiley and Sons
Year
2008
Tongue
English
Weight
454 KB
Volume
50
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

A simple, one‐piece, flat‐plate dipole antenna suitable for dual‐band WLAN applications is presented. The antenna is structured to be of an L‐shape to fit in corners of possible wireless electronics devices. The two radiating arms of the dipole antenna are further short‐circuited through a narrow shorting strip at the corners, making it possible for the antenna to be manufactured by stamping a single, flat metal plate only one time. That is, the proposed antenna in the mass‐production phase can be at lower cost. In addition, by cutting an L‐shaped slit at proper location in each radiating arm, a dual‐band operation can easily be obtained. The design prototype of the antenna in the 2.4/5.2 GHz bands is discussed in detail in the article. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 678–680, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23179

📜 SIMILAR VOLUMES

Narrow flat metal-plate antenna for dual
Narrow flat metal-plate antenna for dual-band WLAN operation
✍ Chi-Yin Fang; Hao-Chun Tung; Saou-Wen Su; Kin-Lu Wong 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 221 KB 👁 1 views

## Abstract A novel dual‐band antenna made of a narrow, rectangular, flat metal plate for wireless local area network (WLAN) operation in the 2.4‐ and 5.2‐GHz bands is presented. The antenna comprises a larger radiating arm, a smaller radiating arm, and a shorting portion. The larger and smaller ra

Low-cost flat metal-plate dipole antenna
Low-cost flat metal-plate dipole antenna for 2.4/5-GHz WLAN operation
✍ Saou-Wen Su; Jui-Hung Chou 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 413 KB 👁 1 views

## Abstract A low‐cost, one‐piece, flat‐plate dipole antenna for dual WLAN band operation is presented. The dipole antenna is rectangular in shape with the dimensions 10 mm × 37 mm and fed by 50‐Ω mini‐coaxial cable. By cutting two L‐shaped slits in each radiating arm, two dipole arms are obtained,

Compact dual-band metal-plate antenna fo
Compact dual-band metal-plate antenna for 2.4/5.2-GHz WLAN operation
✍ Chih-Ming Su; Wen-Shyang Chen; Kin-Lu Wong 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 94 KB 👁 1 views

## Abstract A novel compact dual‐band metal‐plate antenna is presented. The antenna is easily constructed by bending a metal plate, which consists of a longer arm as the grounding portion and two shorter arms as the major radiating portions for controlling the resonant modes at about 2.4 and 5.2 GH

A dual-band printed dipole antenna for I
A dual-band printed dipole antenna for IMT-2000 and 5-GHz WLAN applications
✍ Hatem Rmili; Jean-Marie Floc'h; Philippes Besnier; Mohamed Drissi 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 481 KB

## Abstract A dual and wide‐band printed dipole antenna is presented for IMT‐2000 and 5.2/5.4/5.8‐GHz WLAN applications. The proposed balun‐fed antenna consists of a double‐sided printed dipole antenna with a microstrip‐fed disk‐dipole printed on the top side of the substrate, and a modified annula

A planar CPW-fed slot antenna on thin su
A planar CPW-fed slot antenna on thin substrate for dual-band operation of WLAN applications
✍ Cheol Yoon; Won-Jong Lee; Sang-Pil Kang; Suk-Youb Kang; Hwa-Choon Lee; Hyo-Dal P 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 490 KB 👁 1 views

## Abstract This article presents the design and fabrication of a coplanar waveguide (CPW)‐fed slot antenna on thin substrate for dual‐band operation of wireless local‐area network (WLAN) applications within 2.400–2.484 GHz and 5.150–5.350/5.725–5.825 GHz bandwidths. The prototype consists of a thi

Design of a dual-band V-shaped monople a
Design of a dual-band V-shaped monople antenna for DCS/2.4-GHz WLAN operations
✍ Hatem Rmili; Jean-Marie. Floc'h 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 187 KB 👁 1 views

## Abstract In this article, we present a simple surface‐mountable monopole antenna for dual‐band DCS1800 and 2.4‐GHz WLAN operations. The antenna was obtained by folding a metallic strip into a V‐shape, and soldered to a 50‐Ω microstrip feed line printed on a metallized substrate. The proposed ant