## Abstract A dual‐mode bandpass filter (BPF) using microstrip patch resonator is proposed. Open‐stubs are added on the feed‐lines to suppress the spurious response and improve the stopband rejection effectively with little increase in circuit size. Furthermore, a reduced‐size dual‐mode BPF with sp
A novel microstrip dual-mode bandpass filter with harmonic suppression
✍ Scribed by Huang, X.D.; Cheng, C.H.
- Book ID
- 115543968
- Publisher
- IEEE
- Year
- 2006
- Tongue
- English
- Weight
- 461 KB
- Volume
- 16
- Category
- Article
- ISSN
- 1531-1309
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract A novel microstrip bandpass filter using a dual‐mode square‐ring resonator is presented in this paper, in which the input/output microstrip lines are arranged under the square‐ring to improve the coupling between the microstrip lines and the square‐ring. The filter has been investigated
## Abstract A dual‐mode bandpass filter with a high selective performance for dual‐band application is presented in this article.The filter is designed with square loop resonator with tree‐shaped patches attached to the four inner corners of the loop, which equivalents to load capacitors in the inn
## Abstract A new bandpass filter that is composed of two‐stage microstrip‐ring resonators with a center frequency of 5.775 GHz and a bandwidth of 100 MHz is presented in this paper. For the suppression of unnecessary harmonics, low‐pass filters are integrated into a microstrip‐ring resonator. A ha
## Abstract This paper presents a novel, compact, low‐insertion‐loss, sharp‐rejection, wideband microstrip bandpass filter. The filter is based on a ring resonator with direct‐connected orthogonal feed lines, and uses two stepped‐impedance open stubs to construct a wideband passband with two sharp