## Abstract A novel microstrip bandpass filter using a dual‐mode square‐ring resonator is presented in this paper, in which the input/output microstrip lines are arranged under the square‐ring to improve the coupling between the microstrip lines and the square‐ring. The filter has been investigated
A novel coplanar-waveguide bandpass filter using a dual-mode square-ring resonator
✍ Scribed by Huang, X.D.; Cheng, C.H.
- Book ID
- 115543966
- Publisher
- IEEE
- Year
- 2006
- Tongue
- English
- Weight
- 229 KB
- Volume
- 16
- Category
- Article
- ISSN
- 1531-1309
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract A dual‐mode bandpass filter (BPF) using the degenerate modes of a meander square‐ring structure printed on the high‐permittivity substrate is proposed. The dual‐mode resonator is based on a square‐ring loaded with two meander strips at the coupling sides. The filter is printed on the Al
## Abstract This article presents a novel miniaturized bandpass filter using a square ring. Each side of the ring is loaded almost at one of the ends with a stub. The stub increases the current path length; bring down the resonance frequency of the ring. The other end of each stub is terminated wit
## Abstract A compact coplanar waveguide (CPW) band‐pass filter using a cross‐coupled λ/4 resonator with loaded split‐ring resonators (SRRs) is introduced in this letter. The proposed filter exhibits a quasi‐elliptic function response and its circuit size occupies only 12 × 11.8 mm^2^ (≈0.21λ~g~ ×
## Abstract This paper presents a dual‐band bandpass filter by introducing transmission zeroes in the passband of a broadband bandpass filter using square‐loop dual‐mode resonators. The transmission zeroes are achieved by using a dual‐mode resonator. The dual‐mode resonator is attached to two trans