𝔖 Bobbio Scriptorium
✦   LIBER   ✦

A novel butterfly-shaped monopole UWB antenna

✍ Scribed by Qiubo Ye; Zhi Ning Chen; Terence S. P. See

Publisher
John Wiley and Sons
Year
2009
Tongue
English
Weight
154 KB
Volume
51
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

The proposed butterfly‐shaped monopole ultra‐wideband (UWB) antenna consists of two radiating elements (wings) positioned with an angle between them, which provides one more dimension for impedance matching. The simulated and measured results show that the design achieves a broad impedance bandwidth and stable radiation performance over the UWB band. © 2009 Wiley Periodicals, Inc. Microwave Opt Technol Lett 51: 590–593, 2009; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.24125

📜 SIMILAR VOLUMES

A novel key-shaped CPW-fed monopole UWB
A novel key-shaped CPW-fed monopole UWB antenna
✍ Rui-Jin Lin; Y.E. Ming; Xiao-Zheng Lu 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 283 KB 👁 1 views

## Abstract A novel key‐shaped CPW‐fed monopole UWB antenna is proposed in this article. A high frequency structure simulator is used to analyze the proposed antenna in the design process. The proposed antenna has an extremely wide frequency band range, the impedance bandwidth of which is measured

Microstrip-fed monopole dumbbell-shaped
Microstrip-fed monopole dumbbell-shaped antenna for UWB application
✍ Ching-Fang Tseng; Cheng-Liang Huang 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 316 KB

## Abstract The monopole dumbbell‐shaped antenna fed by a 50 Ω microstrip line for ultrawideband (UWB) application is studied. By tuning the dumbbell‐shaped radiator and height of the feed gap (D), the monopole antenna has a 2:1 VSWR (return loss < 10 dB) from 2.89 to more than 15 GHz. The bandwidt

A ring monopole antenna for UWB applicat
A ring monopole antenna for UWB application
✍ Jin-Xiang Xiao; Mei-Fang Wang; Guo-Jian Li 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 226 KB 👁 1 views

## Abstract A simple and compact microstrip‐fed ultra wideband printed monopole antenna is proposed and investigated. The proposed antenna is composed of a circular‐ring fed by a microstrip line and a multistep ground. The measured bandwidth of voltage‐standing wave ratio < 2 is from 3.0 to 12.0 GH

A novel planar UWB monopole antenna form
A novel planar UWB monopole antenna formed on a printed circuit board
✍ M. A. Peyrot-Solis; G. M. Galvan-Tejada; H. Jardon-Aguilar 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 110 KB 👁 1 views

## Abstract A novel planar UWB printed circuit board (PCB) monopole antenna is presented. The design realizes a planarized model of a rectangular planar monopole using a beveling technique over a rectangular ground plane. This was done to investigate the impact on its main parameters when an improv

Novel UWB planar monopole antenna with d
Novel UWB planar monopole antenna with dual band-notched characteristics
✍ Wentao Li; Xiaowei Shi; Tieling Zhang; Yue Song 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 306 KB

## Abstract A novel spade‐shaped microstrip‐fed ultrawideband planar monopole antenna with dual band‐notched characteristics is presented. Dual narrow band‐notched characteristics are achieved by employing an Ω‐shaped slot on the radiating patch and a split‐ring resonator on the backed side. Experi

A novel P-shaped printed monopole antenn
A novel P-shaped printed monopole antenna for RFID applications
✍ Hanhua Yang; Shu Yan 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 200 KB 👁 1 views

## Abstract In this article, a novel p‐shaped printed monopole antenna is first proposed to operate simultaneously at the 2.45 and 5.8 GHz bands for radio frequency identification tag. Printed on a standard 1.6 mm FR4 substrate material, the printed monopole antenna has been demonstrated to provide