Wetting film extraction was combined with colorimetry to determine nanogram amounts of molybdenum(VI). The simple extraction procedure enhanced sensitivity and selectivity while maintaining a high sample throughput. Extraction and back extraction steps were exploited to exclude interference from the
A non-extractive sequential injection method for determination of molybdenum
✍ Scribed by Martina Lešková; Hana Sklenářová; Yaroslav Bazel; Petr Chocholouš; Petr Solich; Vasil Andruch
- Book ID
- 116905734
- Publisher
- Elsevier Science
- Year
- 2012
- Tongue
- English
- Weight
- 549 KB
- Volume
- 96
- Category
- Article
- ISSN
- 0039-9140
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
chromium is soluble in alkaline to slightly acidic waters, whereas trivalent chromium is insoluble or only sparingly soluble under similar conditions. Effluent guidelines of the National Pollutant Elimination Discharge System sets ambient quality requirements for surface waters at 170 mg/l for Cr(II
A spectrophotometric method has been proposed for the sequential determination of molybdenum and tungsten in silicate rocks. The procedure proposed has been successfully used to determine molybdenum and tungsten in granite. The results show that this method can accurately determine molybdenum and tu
## Abstract This paper describes the development of a sequential injection chromatography (SIC) procedure for separation and quantification of the herbicides simazine, atrazine, and propazine exploring the low backpressure of a 2.5 cm long monolithic C~18~ column. The separation of the three compou