## Abstract ## Purpose To construct a temperatureβcontrolled diffusion phantom with known diffusion properties and geometry in order to facilitate the comparison and optimization of diffusion sequences with the objective of increasing the precision of experimentally derived diffusion parameters.
A multi-channel temperature controller for diffusion furnace
β Scribed by W. Lobodzinski; M. Orzylowski; Z. Rudolf
- Publisher
- Elsevier Science
- Year
- 1980
- Weight
- 364 KB
- Volume
- 6
- Category
- Article
- ISSN
- 0303-1268
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
By using a symmetrical arrangement of electrodes (Fig. 1 c) it was also possible to make good silver-silver joints by partially melting two wires together. These joints again were mechanically strong but there was found to be a reduction of the rrr of the silver at the joint. As this reduction was o
hi this study, the effect of a digital sound field control system ( DSFC ) with hmdspeakers arranged three-dimensionally in a multi-purpose hall is discussed. A method is presented of making the tap data set up in the DSFC, based on simulated reflection patterns using the usual ray tracing method. E
Conventional control systems developed so far for long distance cooling channels, are not yet capable of local-temperature control, local-pressure control or sequential control, since thermodynamic properties of supercritical hefium show an order of magnitude change and strong nonlinearity for appli
Effect of oven