๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

The multi-channel sound field control system in a multi-purpose hall

โœ Scribed by Akihisa Kawamura; Masaharu Matsumoto; Hiroko Numazu; Mitsuhiko Serikawa


Publisher
Elsevier Science
Year
1993
Tongue
English
Weight
761 KB
Volume
38
Category
Article
ISSN
0003-682X

No coin nor oath required. For personal study only.

โœฆ Synopsis


hi this study, the effect of a digital sound field control system ( DSFC ) with hmdspeakers arranged three-dimensionally in a multi-purpose hall is discussed. A method is presented of making the tap data set up in the DSFC, based on simulated reflection patterns using the usual ray tracing method. Each reflection is ultimately divided into two vectors which make phantom hnages when they are reproduced by two loudspeakers, while the threedimensional it!formation qf re[tection pattern is comparativeO, preserved. The advantage of this method is that reflections can be produced using small sized hardware. One application of DSFC based on this method is shown in an existing shoehox-O'pe multi-purpose hall, where one side of the wa//is flat and hard, while another wall facing it is covered with d(ffusers, and the reflection patterns of this hall are veo' unique. The target reflection patterns can be obtained #i this specific hall by using the DSFC.


๐Ÿ“œ SIMILAR VOLUMES


Acoustical design of the multi-purpose โ€˜
โœ A. Krokstad; S. Strรธm ๐Ÿ“‚ Article ๐Ÿ“… 1979 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 668 KB

Hjertnes' is a typical multi-purpose hall primarily intended for concerts. A threedimensional ray tracing computer program was used to provide a picture of the sound energy distribution on the audience area of the hall, various room shapes being investigated. This resulted in tilted side walls and a

STRUCTURE-BORNE SOUND TRANSMISSION FROM
โœ S.H. Yap; B.M. Gibbs ๐Ÿ“‚ Article ๐Ÿ“… 1999 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 224 KB

The analysis of structure-borne sound transmission is obscured by the complicated nature of the dynamic interaction between source and receiver at each contact point. There is little measured data because of the practical difยฎculties in directly measuring forces and moments at the contacts. This is