Transmission electron microscopy was used to examine the interface between metal implant materials and bone cells. Specifically, neonatal rat calvaria osteoblasts were cultured on CoCrMo alloy and on 316L stainless steel discs (mechanically polished to a 0.3 km finish) in Dulbecco's Modified Eagle M
A method for transmission electron microscopy investigation of the osteoblast/hydroxyapatite interface
β Scribed by Brian T. Garvey; Rena Bizios
- Publisher
- Wiley (John Wiley & Sons)
- Year
- 1994
- Tongue
- English
- Weight
- 798 KB
- Volume
- 5
- Category
- Article
- ISSN
- 1045-4861
No coin nor oath required. For personal study only.
β¦ Synopsis
Abstract
Neonatal rat calvaria osteoblasts were cultured on hydroxyapatite (as received or relativelyβrough surface and mechanically polished to a 0.3βmΜm finish) and on glass (reference material) in Dulbecco's Modified Eagle Medium supplemented with 10% fetal bovine serum, 50 ΞΌg/mL ascorbic acid, and 10 mM Ξ²βglycerophosphate under standard, sterile, cellβculture conditions for 1, 3, 7, 14 and 21 days. At the end of the prescribed time periods, the cells were fixed and embedded in resin before removing the material substrates by exposure to acid solutions. Transmission electron microscopic examination of stained, ultrathin sections of the biological structures revealed osteoblast monolayers at 1 day of culture but multilayered cell structures at later time periods (14 and 21 days). The osteoblasts exhibited continuous contact and intimate apposition on polished hydroxyapatite and on glass; in contrast, osteoblasts on as received or rough hydroxyapatite made contact with discrete high points, spanned low regions of the material surface, and did not conform to all substrate contours. An electron dense layer (composed of mucopolysaccharides and proteins) was observed on all substrates tested after 7 days of culture. Collagen fibrils were seen interspersed among the osteoblasts as early as 3 days of culture; at later culture times, (i.e., 21 days) mineralized loci were observed in the extracellular matrix. Β© 1994 John Wiley & Sons, Inc.
π SIMILAR VOLUMES
The polyethylene glycol (PEG) embedding and subsequent deembedding method was applied to the observation of general tissues in scanning electron microscopy (SEMI. Resulting SEM images were of high quality. It was demonstrated that intermicroscopic correlation of images between light microscopy 0, sc
## Abstract A key feature in the understanding of the mechanisms of integration versus rejection of implanted materials is a deepened understanding of the elemental and molecular compositions of the interface zone between the surface of the synthetic manβmade material and the biological components