## Abstract A compact tripleβband planar antenna applied to UMTS, WiFi and WiMAX applications is proposed. The proposed antenna provides three wide frequency bands, which are 1744β2759 MHz, 3271β4126 MHz and 4718β5908 MHz, realized in a commercial FR4 printedβ circuit board (PCB) with a permittivit
A highly efficient PA design for WiMAX applications: Theory and experiment
β Scribed by L. El Maazouzi; P. Colantonio; A. Mediavilla; F. Giannini
- Publisher
- John Wiley and Sons
- Year
- 2010
- Tongue
- English
- Weight
- 824 KB
- Volume
- 20
- Category
- Article
- ISSN
- 1096-4290
No coin nor oath required. For personal study only.
β¦ Synopsis
Efficiency in microwave power amplifiers (PAs) is limited by the active device parameters and operating conditions. High values can be obtained by a proper selection of bias point and harmonic terminations or, from a different point of view, by a proper output voltage and/or current waveform shaping. This work outlines the mathematical statements for the proper design of a second harmonic tuning (HT) PA. To validate the theory, the design of a highly efficient 3.5 (WiMAX applications) GHz GaN HEMT PA based on second HT is presented. The measured performances confirm the improvement obtained by means of harmonic manipulation over Class AB tuned load or Class J PAs. An output power of 35.3 dBm has been measured for a maximum of power-added efficiency of around 58% (drain efficiency 69.2%) with a IMD 3 of 19.1 dBc. V
π SIMILAR VOLUMES
## Abstract We have designed and realized a highly linear power amplifier module (PAM) for a WiMAX/WiBro base station using a simple linearization method. To improve the linearity of the PAM, we use largeβsignal intermodulation distortion (IMD) sweet spots, which are part of the inherent properties
## Abstract Printed rectangular slot antenna fed by a 50βΞ© microstrip line with a small isosceles triangle slot for broadband operation is presented. Both impedance and radiation characteristics of this antenna are studied. Experimental results indicate that a 1:2 VSWR bandwidth of 3.97 GHz is achi
## Abstract This paper presents a simple method to design a triβband bandpass filter (BPF) using asymmetric steppedβimpedance resonators (SIRs) with oneβstep discontinuity.Only two SIRs are needed in the filter structure. The triβband passband responses can be achieved by properly selecting the len