𝔖 Bobbio Scriptorium
✦   LIBER   ✦

A directivity-diversity microstrip antenna array in millimeter wave

✍ Scribed by M. Caillet; O. Lafond; M. Himdi; L. Le Garrec

Publisher
John Wiley and Sons
Year
2006
Tongue
English
Weight
174 KB
Volume
48
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

The purpose of this paper is to report on a microstrip reconfigurable antenna in the millimeter‐wave range. This antenna has directivity diversity and is based on a four‐element array. An original method is outlined to guarantee matching for each configuration without changing circuit. Great results have been achieved with a passive prototype and an active antenna is under consideration. © 2006 Wiley Periodicals, Inc. Microwave Opt Technol Lett 48: 1190–1194, 2006; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.21569

📜 SIMILAR VOLUMES

Broadband millimeter-wave planar antenna
Broadband millimeter-wave planar antenna array with a waveguide and microstrip-feed network
✍ Soon-Soo Oh; John Heo; Dong-Hyeon Kim; Jae-Wook Lee; Myung-Sun Song; Young-Sik K 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 284 KB

## Abstract In this paper, we describe a fixed‐beam broadband planar antenna array at millimeter‐wave frequencies. The antenna is fed by waveguide‐feed and microstrip‐feed networks. In order to ensure fixed beams and a broad bandwidth, a subarray concept is introduced. For efficient coupling, a nov

A microstrip antenna array for direct br
A microstrip antenna array for direct broadcast satellite receivers
✍ M. Rubelj; P. F. Wahid; C. G. Christodoulou 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 213 KB 👁 1 views

A uniformly illuminated square subarray of 16 circularly polarized patch elements is de¨eloped. It can be incorporated into a ( ) full-size direct broadcast satellite DBS recei¨er antenna. A stacked circular patch microstrip configuration is used to achie¨e increased bandwidth. Experimental results

Experimental demonstration of a directio
Experimental demonstration of a direction-of-arrival estimation algorithm for millimeter-wave switched-beam array antennas
✍ P. Sanchis; V. Polo; J. Herrera; J. L. Corral; Moon-Soon Choi; J. Marti 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 148 KB

## Abstract In this paper, the experimental demonstration of a direction‐of‐arrival (DOA) estimation algorithm, based on power measurements and suitable for switched‐beam array antennas operating in the millimeter‐wave band, is reported. Simulation and experimental results for the proposed algorith

A microstrip-coupled slot-loop antenna f
A microstrip-coupled slot-loop antenna for integrated receivers in the millimeter-wave band
✍ Pablo Otero; Alejandro Álvarez-Melcón; Jean-François Zürcher; Juan R. Mosig 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 153 KB

A square-loop slot antenna, printed at the back surface of an extended hemispherical lens, is examined as a candidate for ( ) millimeter-wa¨e mm-wa¨e integrated-circuit Schottky-diode mixers. The loop slot is etched in a microwa¨e substrate, and coupled to a microstrip line section printed on the ot

Leaky-wave propagation in a linear micro
Leaky-wave propagation in a linear microstrip array
✍ Choon Sae Lee; Yung-Jen Lin; Vahakn Nalbandian 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 160 KB

lation bandwidths up to 40 GHz in undoped short-cavity In Ga As-GaAs multiple-quantum-well lasers, IEEE Pho-0.35 0.65

A broadband beam-fixed planar-array ante
A broadband beam-fixed planar-array antenna using slot pair and conductive bar at millimeter-wave frequencies
✍ Soonsoo Oh; John Heo; Donghyeon Kim; Jaewook Lee; Myungsun Song; Youngsik Kim 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 253 KB

## Abstract This paper presents a broadband millimeter‐wave planar‐array antenna that uses a slot pair and crossing conductive bar. The antenna is fed by a waveguide feed network in the E‐plane to reduce the feed‐line loss and a microstrip‐feed network in the H‐plane in order to decrease fabricatio