## Abstract The coplanar waveguide (CPW) fed circular slot antenna, resonated by the circular loop with a narrow opening, is designed for obtaining broadband circularly polarized (CP) radiation. The length of protruded signal strip (L~S~) is utilized to adjust the phase difference between two ortho
A CPW-fed antenna with the circular shaped form with the slots for UWB application
✍ Scribed by M. Moosazadeh; Z. Esmati
- Publisher
- John Wiley and Sons
- Year
- 2011
- Tongue
- English
- Weight
- 980 KB
- Volume
- 53
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A novel ultra wideband (UWB) antenna with coplanar waveguide (CPW) feed, consisting of a circular patch and a ground plane truncated with two mirror T–shaped notches is designed for UWB applications. The design has been used as a circular patch with circular slots which produces a semi fractal hexagonal shaped patch. Proposed antenna operates in the adopted bandwidth (3.1–10.6 GHz) with S~11~ < −10 dB, and covers it very well. Experimental and simulated antenna results show that the proposed antenna has a desirable S~11~ level and radiation pattern characteristics for the UWB frequency band range. © 2011 Wiley Periodicals, Inc. Microwave Opt Technol Lett 53:2945–2949, 2011; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.26390
📜 SIMILAR VOLUMES
## Abstract A novel and simple design of a coplanar waveguide‐fed planar monopole antenna with broadband dual‐frequency operation for wireless local area network (WLAN) application is proposed. Good impedance matching for dual‐resonance mode is obtained by feeding the radiating patch with a cross‐s
## Abstract A coplanar waveguide (CPW)‐fed ultra‐wideband staircase monopole antenna with a frequency‐notch characteristic is presented. The proposed antenna consists of a planar four‐step staircase rectangular monopole with a ground short‐circuited stub, open stubs at the ground part, and two‐step
## Abstract A small slot‐loaded elliptical antenna with a band‐notched for ultra wide‐band (UWB) applications is presented in this article. Printed on a dielectric substrate with relative permittivity of 4.4, thickness of 1 mm, and fed by a 50 Ω microstrip line, the proposed antenna satisfies the U
## Abstract Printed rectangular slot antenna fed by a 50‐Ω microstrip line with a small isosceles triangle slot for broadband operation is presented. Both impedance and radiation characteristics of this antenna are studied. Experimental results indicate that a 1:2 VSWR bandwidth of 3.97 GHz is achi
## Abstract In this study, a printed rectangular monopole antenna with a band‐notch function is proposed for ultra‐wideband (UWB) applications. The notched frequency band is achieved by embedding an E‐slot in the rectangular radiation patch. The notched frequency band can be controlled by adjusting