A new type of dual-port, dual-frequency SSFIP r PIFA antenna is described. Its main characteristics are a wide bandwidth at both frequencies, high isolation between ports, and simple construction, together with good radiation properties. As an example of application, a DECT q DCS 1800 r WLAN antenna
A compact dual-port, dual-frequency printed antenna with high decoupling
✍ Scribed by J.-F. Zürcher; A. Skrivervik; O. Staub; S. Vaccaro
- Publisher
- John Wiley and Sons
- Year
- 1998
- Tongue
- English
- Weight
- 468 KB
- Volume
- 19
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
A new type of dual-port, dual-frequency printed antenna is described. Its main characteristics are a relati¨ely wide bandwidth, high isolation between ports, and simple construction, together with good radiation properties. As an example of an application, a DECTqDCS 1800rWLAN antenna has been realized, and is described in detail with measured data.
📜 SIMILAR VOLUMES
Conical antennas mounted on finite ground planes are analyzed using a spherical-coordinate finite-difference time-domain ( ) FDTD model. Key features of the model are discussed, with particular emphasis placed upon modeling of the source region. Results demonstrate how ground plane size can be used
This paper presents a new, compact, dual-frequency design of single-feed circular microstrip antennas with an offset circular slot placed close to the patch boundary. It is found that, when the radius of the offset slot is about 0.38᎐0.62 times the radius of the circular patch, dual-frequency operat
## Figure 10 Transmittance of x-component from anisotropic plate with and without grid as a function of frequency frequency. However, the parasitic component with the grid becomes much bigger when the frequency shifts far away from the center frequency. ## V. CONCLUSIONS The anisotropic FDTD fo