✦ LIBER ✦

A 3D-CAM system for quick prototyping and microfabrication using excimer laser micromachining

✍ Scribed by Emir Mutapcic; Pio Iovenitti; Jason P. Hayes

Book ID: 106184798
Publisher: Springer-Verlag
Year: 2005
Tongue: English
Weight: 591 KB
Volume: 12
Category: Article
ISSN: 0946-7076
DOI: 10.1007/s00542-005-0009-7

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

A prototyping and microfabrication CAD/C

A prototyping and microfabrication CAD/CAM tool for the excimer laser micromachining process

✍ Emir Mutapcic; Pio Iovenitti; Jason P. Hayes 📂 Article 📅 2005 🏛 Springer 🌐 English ⚖ 366 KB

An integrated experimental approach to l

An integrated experimental approach to link a laser digitiser, a CAD/CAM system and a rapid prototyping system for biomedical applications

✍ C. K. Chua; S. M. Chou; W. S. Ng; K. Y. Chow; S. T. Lee; S. C. Aung; C. S. Seah 📂 Article 📅 1998 🏛 Springer 🌐 English ⚖ 584 KB

Autofluorescence spectroscopy using a Xe

Autofluorescence spectroscopy using a XeCl excimer laser system for simultaneous plaque ablation and fluorescence excitation

✍ Dr. Andreas J. Morguet; Beate Körber; Bernd Abel; Horst Hippler; Volker Wiegand; 📂 Article 📅 1994 🏛 John Wiley and Sons 🌐 English ⚖ 975 KB

Laser-induced fluorescence may be used to guide laser ablation of atherosclerotic lesions. This study was performed to evaluate arterial autofluorescence spectroscopy in vitro using a single XeCl excimer laser (308 nm) for simultaneous tissue ablation and fluorescence excitation. The laser beam was

Design Principles for an Illumination Sy

Design Principles for an Illumination System Using an Excimer Laser as a Light Source: J. Wangler, J. Liegel, M. J. Lacombat, S. Wittekoek, SPIE, Optical microlithography and metrology for microcircuit fabrication, Vol 1138, Paris (France), 24–28 Apr 1989, pp. 129–136. Society of Photo-Optical Instrumentation Engineers. Bellingham, WA (USA)

📂 Article 📅 1991 🏛 Elsevier Science 🌐 English ⚖ 273 KB