✦ LIBER ✦

A 35-mW 3.6-mm2 fully integrated 0.18-μm CMOS GPS radio

✍ Scribed by Montagna, G.; Gramegna, G.; Bietti, I.; Franciotta, M.; Baschirotto, A.; De Vita, P.; Pelleriti, R.; Paparo, M.; Castello, R.

Book ID: 118123007
Publisher: IEEE
Year: 2003
Tongue: English
Weight: 795 KB
Volume: 38
Category: Article
ISSN: 0018-9200
DOI: 10.1109/jssc.2003.813298

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

A complete single-chip GPS receiver with

A complete single-chip GPS receiver with 1.6-V 24-mW radio in 0.18-μm CMOS

✍ Kadoyama, T.; Suzuki, N.; Sasho, N.; Iizuka, H.; Nagase, I.; Usukubo, H.; Kataku 📂 Article 📅 2004 🏛 IEEE 🌐 English ⚖ 675 KB

A 15-mW fully integrated I/Q synthesizer

A 15-mW fully integrated I/Q synthesizer for Bluetooth in 0.18-μm CMOS

✍ Leenaerts, D.M.W.; Vaucher, C.S.; Bergveld, H.J.; Thompson, M.; Moore, K. 📂 Article 📅 2003 🏛 IEEE 🌐 English ⚖ 569 KB

A 1.3-V 5-mW fully integrated tunable ba

A 1.3-V 5-mW fully integrated tunable bandpass filter at 2.1 GHz in 0.35-μm CMOS

✍ Dulger, F.; Sanchez-Sinencio, E.; Silva-Martinez, J. 📂 Article 📅 2003 🏛 IEEE 🌐 English ⚖ 806 KB

A 17-mW transmitter and frequency synthe

A 17-mW transmitter and frequency synthesizer for 900-MHz GSM fully integrated in 0.35-μm CMOS

✍ Hegazi, E.; Abidi, A.A. 📂 Article 📅 2003 🏛 IEEE 🌐 English ⚖ 909 KB

A 52-mW 3.1–10.6-GHz Fully Integrated Co

A 52-mW 3.1–10.6-GHz Fully Integrated Correlator for IR-UWB Transceivers in 0.18 CMOS

✍ Haolu Xie; Xin Wang; Lin Lin; He Tang; Qiang Fang; Hui Zhao; Shijun Wang; Fei Ya 📂 Article 📅 2010 🏛 IEEE 🌐 English ⚖ 344 KB

A 1.2-V fully integrated 2.4-GHz low-noi

A 1.2-V fully integrated 2.4-GHz low-noise amplifier in 0.35-μm CMOS technology

✍ C. C. Meng; M. H. Chiang; T. H. Wu 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 314 KB

## Abstract A 1.2‐V fully integrated 0.35‐μm inductively degenerated common source CMOS low‐noise amplifier has been demonstrated at 2.4 GHz in this paper. A simple common source configuration can be operated at lower voltage and has lower output impedance when compared with a conventional high out