✦ LIBER ✦

A 1.9-GHz, 1-W CMOS class-E power amplifier for wireless communications

✍ Scribed by King-Chun Tsai; Gray, P.R.

Book ID: 119775381
Publisher: IEEE
Year: 1999
Tongue: English
Weight: 367 KB
Volume: 34
Category: Article
ISSN: 0018-9200
DOI: 10.1109/4.772411

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

1.8 GHz class E power amplifier for wire

1.8 GHz class E power amplifier for wireless communications

✍ Sowlati, T.; Greshishchev, Y.; Andre, C.; Salama, T. 📂 Article 📅 1996 🏛 The Institution of Electrical Engineers 🌐 English ⚖ 448 KB

A cascode modulated class-E power amplif

A cascode modulated class-E power amplifier for wireless communications

✍ Daniel Sira; Pia Thomsen; Torben Larsen 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 998 KB

A 700-MHz 1-W fully differential CMOS cl

A 700-MHz 1-W fully differential CMOS class-E power amplifier

✍ Mertens, K.L.R.; Steyaert, M.S.J. 📂 Article 📅 2002 🏛 IEEE 🌐 English ⚖ 139 KB

CMOS class-E power amplifier (1.8-GHz) w

CMOS class-E power amplifier (1.8-GHz) with an additional thin-film technology

✍ Park, C.; Seo, C. 📂 Article 📅 2010 🏛 The Institution of Engineering and Technology 🌐 English ⚖ 693 KB

Fully integrated 1.9-GHz CMOS power ampl

Fully integrated 1.9-GHz CMOS power amplifier for polar transmitter applications

✍ Changkun Park; Younsuk Kim; Haksun Kim; Songcheol Hong 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 127 KB

cations in the complex wave propagation environment. Similar radiation patterns for other frequencies over the operating band were also seen, and the results are not shown for brevity. Measured peak antenna gain and simulated (Ansoft HFSS) radiation efficiency versus frequency is shown in Figure 4.

A 1.9-GHz CMOS power amplifier using an

A 1.9-GHz CMOS power amplifier using an interdigitated transmission line transformer

✍ Changkun Park; Sang-Hyun Baek; Bon-Hyun Ku; Songcheol Hong 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 200 KB

## Abstract A 1.9‐GHz CMOS differential power amplifier for polar transmitter applications is designed using a 0.25‐μm RF CMOS process. The input transformer and output transformer are fully integrated on the chip. The transmission line transformer is used as an output power combiner and an output