09 Combustion (burners, combustion systems) NO, reduction, but less effective for NzO reduction; the optimum value of the ratio of primary/ total air was -0.8 for minimizing NO, emissions. Limestone injection at calcium-sulfur molar ratios >2:1 made it possible to remove >90% of SOz formed, although
98/03660 Method and apparatus for manufacture of fuels from waste plastics
- Publisher
- Elsevier Science
- Year
- 1998
- Weight
- 210 KB
- Volume
- 39
- Category
- Article
- ISSN
- 0140-6701
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
efficiency; the former gave the similar oil yield to that with tetralin solvent, while the latter did the lower yield because of its too high hydrogen acceptability. The liquefaction scheme for the higher efficiency is discussed in terms of reaction conditions including catalysts and solvents.
In Japanese) A means of distillation to recover oils by thermal decomposition of raw materials containing plasticizers, halogen compounds and waste plastics is a feature of this apparatus. Also included is a cooling means to separate decomposition products of plasticizers from a gas or a liquid obt
Steam raising (boiler operation/design
16 Fuel science and technology (fundamental science, analysis, instrumentation) time is estimated at around 3 years, which seems to be acceptable even for a private owner. A first simple design of a gas turbine using CO\* as working fluid is also presented.