✦ LIBER ✦

5. High-carbon-yield organic binder materials for fabrication of carbon-carbon composities

✍ Scribed by W.E Smith

Publisher: Elsevier Science
Year: 1969
Tongue: English
Weight: 132 KB
Volume: 7
Category: Article
ISSN: 0008-6223
DOI: 10.1016/0008-6223(69)90534-x

No coin nor oath required. For personal study only.

✦ Synopsis

resin binders with the intent of using the experimental results as a guide to improve graphite fabrication. Experimental data directed towards an understanding of the relationships between DTA and fabrication variables are reported.

📜 SIMILAR VOLUMES

A Concept for the Fabrication of Penetra

A Concept for the Fabrication of Penetrating Carbon/Silica Hybrid Materials

✍ H. Müller; P. Rehak; C. Jäger; J. Hartmann; N. Meyer; S. Spange 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 228 KB 👁 2 views

Sputtering yields of carbon based materi

Sputtering yields of carbon based materials under high particle flux with low energy

✍ K. Nakamura; A. Nagase; M. Dairaku; M. Akiba; M. Araki; Y. Okumura 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 323 KB

Fabrication of Electrospinning-Derived C

Fabrication of Electrospinning-Derived Carbon Nanofiber Webs for the Anode Material of Lithium-Ion Secondary Batteries

✍ C. Kim; K. S. Yang; M. Kojima; K. Yoshida; Y. J. Kim; Y. A. Kim; M. Endo 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 397 KB 👁 2 views

Hydrothermal Carbonization of Abundant R

Hydrothermal Carbonization of Abundant Renewable Natural Organic Chemicals for High-Performance Supercapacitor Electrodes

✍ Lu Wei; Marta Sevilla; Antonio B. Fuertes; Robert Mokaya; Gleb Yushin 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 456 KB

ChemInform Abstract: High-Yield Assembly

ChemInform Abstract: High-Yield Assembly of Individual Single-Walled Carbon Nanotube Tips for Scanning Probe Microscopies.

✍ Jason H. Hafner; Chin-Li Cheung; Tjerk H. Oosterkamp; Charles M. Lieber 📂 Article 📅 2010 🏛 John Wiley and Sons ⚖ 28 KB 👁 1 views

Fabrication of a biodegradable calcium p

Fabrication of a biodegradable calcium polyphosphate/polyvinyl-urethane carbonate composite for high load bearing osteosynthesis applications

✍ Scott D. Ramsay; Robert M. Pilliar; J. Paul Santerre 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 331 KB

## Abstract The formation of biodegradable implants for use in osteosynthesis has been a major goal of biomaterials research for the past 2–3 decades. Self‐reinforced polylactide systems represent the most significant success of this research to date, however, with elastic constants up to 12–15 GPa