✦ LIBER ✦

4780955 Apparatus for making a tube and fin heat exchanger

✍ Scribed by StevenL. Stroup

Publisher: Elsevier Science
Year: 1989
Tongue: English
Weight: 86 KB
Volume: 9
Category: Article
ISSN: 0890-4332
DOI: 10.1016/0890-4332(89)90046-x

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Wing-type vortex generators for fin-and-

Wing-type vortex generators for fin-and-tube heat exchangers

✍ M. Fiebig; A. Valencia; N.K. Mitra 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 720 KB

Correlations for wet surface ratio of fi

Correlations for wet surface ratio of fin-and-tube heat exchangers

✍ Worachest Pirompugd; Chi-Chuan Wang; Somchai Wongwises 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 509 KB

Correlations are proposed for the wet surface ratio of a fin-and-tube heat exchanger with plain and wavy fin geometry under dehumidifying conditions. The 'Finite Circular Fin Method' (FCFM) is used for data reduction. It is found that the percentage of wet surface area increases with increasing fin

Transient two-dimensional model of frost

Transient two-dimensional model of frost formation on a fin-and-tube heat exchanger

✍ Kristian Lenic; Anica Trp; Bernard Frankovic 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 562 KB

Effect of fin spacing on the heat transf

Effect of fin spacing on the heat transfer and pressure drop of a two-row plate fin and tube heat exchanger

✍ Z.Q. Chen; J.X. Ren 📂 Article 📅 1988 🏛 Elsevier Science 🌐 English ⚖ 902 KB

99/03358 Local flow and heat transfer of

99/03358 Local flow and heat transfer of a 2-row offset strip fin-tube heat exchanger

📂 Article 📅 1999 🏛 Elsevier Science ⚖ 218 KB

Numerical analysis of heat transfer and

Numerical analysis of heat transfer and fluid flow in a three-dimensional wavy-fin and tube heat exchanger

✍ Jiin-Yuh Jang; Li-Kwen Chen 📂 Article 📅 1997 🏛 Elsevier Science 🌐 English ⚖ 812 KB

The effects of different geometrical parameters, including tube row numbers (14 rows), wavy angles (0 = 8.95", 17.05", 32.21") and wavy heights (S = 0.751, 1.500 and 3.003 mm) are investigated in detail for the Reynolds number ReH (based on the fin spacing and the frontal velocity) ranging from 400