✦ LIBER ✦

3-D morphological characterization of carbon black aggregates using atomic force microscopy

✍ Scribed by W. Xu; T.W. Zerda; H. Raab; D. Goritz

Publisher: Elsevier Science
Year: 1997
Tongue: English
Weight: 404 KB
Volume: 35
Category: Article
ISSN: 0008-6223
DOI: 10.1016/s0008-6223(97)83725-6

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

3-D morphological characterization of th

3-D morphological characterization of the liver parenchyma by atomic force microscopy and by scanning electron microscopy

✍ Mahmoud Melling; Daniela Karimian–Teherani; Sascha Mostler; Mark Behnam; Sonja H 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 669 KB

## Abstract A comparative study of atomic force microscopy (AFM) and scanning electron microscopy (SEM) imaging of the healthy human liver parenchyma was carried out to determine the similarities and the differences. In this study, we compared the fine hepatic structures as observed by SEM and AFM.

Characterization of polymer morphology i

Characterization of polymer morphology in polyurethane foams using atomic force microscopy

✍ Qiang Lan; Greg Haugstad 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 554 KB

## Abstract One of the most important challenges in polyurethane (PU) science is characterization of foam morphologies, which provides information to help understand material properties and improve synthesis conditions. Atomic force microscopy (AFM) is a very useful technique to obtain such informa

Characterization of the surface morpholo

Characterization of the surface morphology of durum wheat starch granules using atomic force microscopy

✍ S. Neethirajan; D.J. Thomson; D.S. Jayas; N.D.G. White 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 619 KB

## Abstract Knowledge of the structure and properties of microscopic surfaces of durum wheat starch granules is essential for understanding the functional and physico‐chemical properties. The nanoscale surface undulations on the starch granules inside durum wheat macroscopically influence the milli

Characterization of epoxy/single-walled

Characterization of epoxy/single-walled carbon nanotubes composite samples via atomic force acoustic microscopy

✍ D. Passeri; M. Rossi; A. Alippi; A. Bettucci; M.L. Terranova; E. Tamburri; F. To 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 578 KB

Atomic force acoustic microscopy technique has been used to characterize structural and mechanical properties of a nanocomposite sample, obtained by incorporating single-walled carbon nanotubes (SWCNTs) into epoxy resin. The aim of the reported preliminary characterization is to investigate the reli

Erratum: Neethirajan et al., Characteriz

Erratum: Neethirajan et al., Characterization of the Surface Morphology of Durum Wheat Starch Granules Using Atomic Force Microscopy. Microscopy Research and Technique 71:125–132.

📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 25 KB

Several inaccuracies were discovered in the publication of the above article. The caption to Figure 2 should read ''AFM images of pure Spurr's resin samples. Scan size area of the image is (80 lm) 2 .'' The caption to Figure 5 should read ''AFM image of durum wheat vitreous starch granule surfaces

Surface characterization and ageing of u

Surface characterization and ageing of ultraviolet-ozone-treated polymers using atomic force microscopy and x-ray photoelectron spectroscopy

✍ Teare, D. O. H.; Ton-That, C.; Bradley, R. H. 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 241 KB 👁 1 views

Ultraviolet-ozone (UVO) treatment of poly(ethyleneterephthalate) (PET) films and polystyrene (PS) dishes of up to 10 min exposure has been studied. Surface polarity, oxygen chemisorption and topographical change were analysed by contact angle measurement, x-ray photoelectron spectroscopy and atomic