2-Aminothiazole derivatives as Adsorption Inhibitors for corrosion of commercial copper and brass in acid solutions
✍ Scribed by Dr. H. H. Rehan
- Publisher
- John Wiley and Sons
- Year
- 1993
- Tongue
- English
- Weight
- 467 KB
- Volume
- 24
- Category
- Article
- ISSN
- 0933-5137
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Corrosion inhibition of commercial copper and cold‐worked and annealed α‐brass (Cu/Zn : 69/31) in acid chloride solutions by some 2‐aminothiazole derivatives was studied by weight loss, polarization and capacitance measurements. The study includes the effect of substituent type at position 4, the inhibitor concentration and pH on the efficiency of inhibition. The results showed that the inhibition occured via chemisorption of the inhibitor molecules on the corroding metal following Temkin's isotherm and the adsorption process involved the electron donation from the inhibitor to the metal surface. Quantitatively the inhibition efficiency was found to run parallel to the electron density on the thiazole molecule according to Hammett's relation and the sensitivity of the process is independent of the corroding metal. The inhibition efficiency was found to decrease significantly as the solution pH deceases due to the protonation of the inhibiting molecules.
📜 SIMILAR VOLUMES
The inhibiting action of aniline and some of its derivatives (o-, m-and p-anisidine) towards the corrosion behaviour of nickel in 1 M HCl solution has been studied using weight loss and polarization techniques. These compounds were found to retard the corrosion rate of nickel. At constant temperatur
## Abstract In this paper the corrosion behaviour of copper in 5% (by weight) citric, sulphuric and hydrochloric acids is studied. The efficiency of 2‐amino‐5‐mercapto‐1,3,4‐thiadiazole (AMT) as a corrosion inhibitor is compared with the use of benzotriazole (BTA). The experimental techniques were