✦ LIBER ✦

00/03375 Evaluation and modeling of performance of anode-supported solid oxide fuel cell

Publisher: Elsevier Science
Year: 2000
Weight: 221 KB
Volume: 41
Category: Article
ISSN: 0140-6701
DOI: 10.1016/s0140-6701(00)94448-5

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Microscale Modeling of an Anode-Supporte

Microscale Modeling of an Anode-Supported Planar Solid Oxide Fuel Cell

✍ P. Chinda; W. Wechsatol; S. Chanchaona; P. Brault 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 1014 KB

The solid oxide fuel cell (SOFC) is a highly efficient energy conversion system that transforms chemical energy to electrical energy and heat directly from gasified fuels by electrochemical reactions of fuels and oxidants. The supplied fuels can be hydrocarbon compounds such as CH 4 , C 2 H 6 , and

Thermal stress modeling of anode support

Thermal stress modeling of anode supported micro-tubular solid oxide fuel cell

✍ Daan Cui; Mojie Cheng 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 936 KB

Performance of anode-supported solid oxi

Performance of anode-supported solid oxide fuel cell using novel ceria electrolyte

✍ Jin Soo Ahn; Shobit Omar; Heesung Yoon; Juan C. Nino; Eric D. Wachsman 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 664 KB

Three-dimensional thermo-fluid and elect

Three-dimensional thermo-fluid and electrochemical modeling of anode-supported planar solid oxide fuel cell

✍ Zuopeng Qu; P.V. Aravind; N.J.J. Dekker; A.H.H. Janssen; N. Woudstra; A.H.M. Ver 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 648 KB

Characterisation of electrical performan

Characterisation of electrical performance of anode supported micro-tubular solid oxide fuel cell with methane fuel

✍ Tae Jung Lee; Kevin Kendall 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 511 KB

Strength of Anode-Supported Solid Oxide

Strength of Anode-Supported Solid Oxide Fuel Cells

✍ A. Faes; H. L. Frandsen; A. Kaiser; M. Pihlatie 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 797 KB

## Abstract Nickel oxide and yttria doped zirconia composite strength is crucial for anode‐supported solid oxide fuel cells, especially during transient operation, but also for the initial stacking process, where cell curvature after sintering can cause problems. This work first compares tensile an