✦ LIBER ✦

Zone drawing and zone annealing of poly(ethylene terephthalate) microfiber prepared by CO2 laser thinning

✍ Scribed by Akihiro Suzuki; Takahiro Okano

Publisher: John Wiley and Sons
Year: 2004
Tongue: English
Weight: 170 KB
Volume: 92
Category: Article
ISSN: 0021-8995
DOI: 10.1002/app.20318

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Zone-drawing and zone-annealing of poly(

Zone-drawing and zone-annealing of poly(L-lactic acid) microfiber prepared by CO2 laser-thinning method

✍ Akihiro Suzuki; Daisuke Mizuochi 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 271 KB 👁 2 views

High temperature zone-drawing of nylon 6

High temperature zone-drawing of nylon 66 microfiber prepared by CO2 laser-thinning

✍ Akihiro Suzuki; Toshinori Hasegawa 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 168 KB 👁 1 views

Mechanical properties and superstructure

Mechanical properties and superstructure of poly(ethylene terephthalate) fibers zone-drawn and zone-annealed by CO2 laser heating

✍ Akihiro Suzuki; Noriaki Mochiduki 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 226 KB 👁 2 views

## Abstract A laser‐heating zone‐drawing and zone‐annealing method using a continuous‐wave carbon dioxide laser was applied to poly(ethylene terephthalate) (PET) fiber to improve its mechanical properties. The as‐spun fiber was zone‐drawn under a applied tension (σ~__a__~) of 4.44 MPa at a laser po

Application of continuous zone-drawing/z

Application of continuous zone-drawing/zone-annealing method to poly(ethylene terephthalate) fibers

✍ Akihiro Suzuki; Yoshinori Sato; Toshio Kunugi 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 192 KB 👁 1 views

A continuous zone-drawing/zone-annealing method was applied to poly-(ethylene terephthalate) fibers in order to improve their mechanical properties. Apparatus used for this treatment was assembled in our laboratory. The continuous zonedrawing treatment was carried out at a drawing temperature of 103

Application of CO2 laser heating zone dr

Application of CO2 laser heating zone drawing and zone annealing to nylon 6 fibers

✍ Akihiro Suzuki; Masayoshi Ishihara 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 180 KB 👁 1 views

## Abstract Nlon 6 fibers were zone drawn and zone annealed by using a continuous wave carbon dioxide laser to develop their mechanical properties. A laser‐heating zone drawing was carried out under a applied tension of 35.4 MPa at a power density of 9.65 W · cm^−2^, and then the zone‐drawn fiber w

Mechanical properties and microstructure

Mechanical properties and microstructure of poly(ethylene terephthalate) microfiber prepared by carbon dioxide laser heating

✍ Akihiro Suzuki; Noriaki Mochizuki 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 157 KB 👁 1 views