X-ray fluorescence and X-ray transmission microtomography imaging system
✍ Scribed by Gabriela R. Pereira; Henrique S. Rocha; Marcelino J. Anjos; Paulo Faria; Carlos A. Pérez; Ricardo T. Lopes
- Publisher
- Elsevier Science
- Year
- 2007
- Tongue
- English
- Weight
- 589 KB
- Volume
- 581
- Category
- Article
- ISSN
- 0168-9002
No coin nor oath required. For personal study only.
✦ Synopsis
An X-ray Transmission Microtomography (CT) system combined with an X-ray Fluorescence Microtomography (XRFCT) system was implemented in the Brazilian Synchrotron Light Source (LNLS), Campinas, Brazil. The main aim of this work is to determine the elemental and absorption distribution map in breast tissue samples. The experiments were performed at the X-Ray Fluorescence beamline (D09B-XRF) of the Brazilian Synchrotron Light Source (LNLS), Campinas, Brazil. A quasi-monochromatic beam produced by a multilayer monochromator was used as an incident beam. The fluorescence photons were acquired with an energy dispersive HPGe detector (CANBERRA Industries Inc.) placed at 90 to the incident beam, while transmitted photons were detected with a fast Na(Tl) scintillation counter (CYBERSTAR Oxford Danfysik) placed behind the sample in the beam direction. All the tomographic images were reconstructed using a filtered-back projection algorithm.
📜 SIMILAR VOLUMES
The main goal of this work is to determine the capabilities of the Medipix2 and Timepix devices for imaging in X-ray fluorescence (XRF) analysis. The energy resolution of these devices is not sufficient for identification of characteristic radiation in each pixel. The proposed method of per pixel sp
## Abstract Characteristic X‐ray fluorescence is a technique that can be used to establish elemental concentrations for a large number of different chemical elements simultaneously in different locations in cell and tissue samples. Exposing the samples to an X‐ray beam is the basis of X‐ray fluores
Starting on a laboratory developed portable X-ray fluorescence (PXRF) spectrometer; three different analytical results can be performed: analysis of chemical elements, analysis of major chemical crystalline phase and structural analysis, which represents a contribution to a new, low cost development