𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Weight functions and stress intensity factors for quarter-elliptical corner cracks in fastener holes

✍ Scribed by Q. CHEN; X. WANG

Book ID
109013986
Publisher
John Wiley and Sons
Year
2004
Tongue
English
Weight
191 KB
Volume
27
Category
Article
ISSN
8756-758X

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Weight functions and Stress Intensity Ma
Weight functions and Stress Intensity Magnification factors for elliptical and semi-elliptical cracks under variable normal stress – Part II
✍ Dipl.-Ing. W. Huget; Dipl.-Ing. T. Reddemann; Dr.-Ing. L. GrΓΌter πŸ“‚ Article πŸ“… 1984 πŸ› John Wiley and Sons 🌐 English βš– 344 KB

Surface. cracks under peak stresses are investigated. The calculational procedure is based on the general form of the weight function for an elliptical crack embedded in an infinite solid. Two points on the contour of the ellipse are investigated. A new correction procedure for transfer from the emb

Weight functions and Stress Intensity Ma
Weight functions and Stress Intensity Magnification factors for elliptical and semi-elliptical cracks under variable normal stress – part I
✍ Dr.-Ing. L. Grueter; Dipl-Ing. W. Huget; Dipl.-Ing. H. Kylla πŸ“‚ Article πŸ“… 1984 πŸ› John Wiley and Sons 🌐 English βš– 755 KB

Surface cracks under peak stresses are investigated. The calculational procedure is based on the general form of the weight function for an elliptical crack embedded in an infinite solid. Two points on the contour of the ellipse are investigated. The superposition method is used for transfer from th

Stress intensity factors of embedded ell
Stress intensity factors of embedded elliptical cracks for weight function applications
πŸ“‚ Article πŸ“… 1989 πŸ› Springer Netherlands 🌐 English βš– 22 KB

CORRIGENDUM "STRESS INTENSITY FACTORS OF EMBEDDED ELLIPTICAL CRACKS FOR WEIGHT FUNCTION APPLICATIONS," T. Fett and C. Mattheck\* The following corrections have been brought to our attention: Equation (3): The second coefficient in the first row of MB has to be 0.0003/z instead of 0.003p, Equation (3