✦ LIBER ✦

Wear resistance of detonation coatings of Ni-Al-Si and Ni-Al-B powders under conditions of boundary lubrication

✍ Scribed by V. A. Shchepetov; V. Kh. Kadyrov; V. A. Voitov

Publisher: Springer
Year: 1989
Tongue: English
Weight: 271 KB
Volume: 28
Category: Article
ISSN: 1573-9066
DOI: 10.1007/bf01198904

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of surfactant on the electrodepos

Effect of surfactant on the electrodeposition and wear resistance of Ni–Al2O3 composite coatings

✍ Li Chen; Liping Wang; Zhixiang Zeng; Junyan Zhang 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 983 KB

Effect of grinding on plain fatigue and

Effect of grinding on plain fatigue and fretting fatigue behaviour of detonation gun sprayed Cu–Ni–In coating on Al–Mg–Si alloy

✍ B. Rajasekaran; S. Ganesh Sundara Raman; S.V. Joshi; G. Sundararajan 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 846 KB

Uniaxial plain fatigue and fretting fatigue tests were carried out on detonation gun sprayed Cu-Ni-In coating on Al-Mg-Si alloy samples. The samples in three conditions were considered: uncoated, ascoated and ground after coating. Ground coated specimens exhibited superior plain fatigue and fretting

Influence of instability of the β-phase

Influence of instability of the β-phase of the aluminide coating on the condition and scale resistance of the surface layer of Ni−Al alloys

✍ E. G. Lesnikova; V. P. Lesnikov 📂 Article 📅 1986 🏛 Springer US 🌐 English ⚖ 517 KB

A study of corrosion resistance and form

A study of corrosion resistance and formation characteristics of electroless Ni–P alloy coatings on Al18B4O33w/6061 Al composite with a simple surface pre-treatment

✍ Sha-wei Tang; Cui-ju Wang; Ya-Li Sun; Jin Hu 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 696 KB

Ni-P alloy coatings were successfully deposited on Al 18 B 4 O 33 w/6061 Al composite by electroless deposition. A simple surface pre-treatment method prior to the coating process was used for the first time. The coatings were characterized by SEM/EDX, TEM and electrochemical methods. It was found t