✦ LIBER ✦

Wear mechanisms during lubricated sliding of XD™ metal matrix composites against steel

✍ Scribed by Caracostas, C.A.; Chiou, W.-A.; Fine, M.E.; Cheng, H.S.

Book ID: 121972502
Publisher: Elsevier Science
Year: 1992
Weight: 440 KB
Volume: 27
Category: Article
ISSN: 0956-716X
DOI: 10.1016/0956-716X(92)90107-P

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Materials transfer and formation of mech

Materials transfer and formation of mechanically mixed layer in dry sliding wear of metal matrix composites against steel

✍ Dehong Lu; Mingyuan Gu; Zhongliang Shi 📂 Article 📅 1999 🏛 Springer US 🌐 English ⚖ 318 KB

Wear behavior of SiC particulate reinfor

Wear behavior of SiC particulate reinforced aluminum composites sliding against steel balls under dry and lubricated conditions

✍ K.N. Tandon; Z.C. Feng; X.Y. Li 📂 Article 📅 1999 🏛 Springer US 🌐 English ⚖ 720 KB

Effects of lubricating-oil additives on

Effects of lubricating-oil additives on the friction and wear properties of polymers and their composites sliding against steel under oil-lubricated conditions

✍ Zhao-Zhu Zhang; Qun-Ji Xue; Wei-Min Liu; Wei-Chang Shen 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 392 KB 👁 2 views

The effects of lubricating-oil additive zinc dialkyldithiophosphate (ZDDP) on the friction and wear properties of polymers and their composites sliding against GCr15 bearing steel were studied by using an MHK-500 ring-on-block wear tester (Timken wear tester). Then the frictional surfaces of the fri

Sliding wear behaviour of some Fe-, Co-

Sliding wear behaviour of some Fe-, Co- and Ni-based metallic glasses during rubbing against bearing steel

✍ Braham Prakash; Ken’ichi Hiratsuka 📂 Article 📅 2000 🏛 Springer US 🌐 English ⚖ 208 KB

Dry sliding wear behavior of in situ Al–

Dry sliding wear behavior of in situ Al–Al4C3 metal matrix composite produced by mechanical alloying technique

✍ Halil Arik; Yusuf Ozcatalbas; Mehmet Turker 📂 Article 📅 2006 🏛 Elsevier Science ⚖ 570 KB

Dry sliding wear behavior of in situ Al-Al 4 C 3 composite produced by mechanical alloying technique was examined. Mechanically alloyed Al-C powders were compacted at 650 MPa to produce the blanks with the size of ø10 • 25 mm. These blanks were then sintered at 650 °C for 20 h and MMC samples with t

Surface texture changes followed-up in r

Surface texture changes followed-up in real time during the initial wear transient of dry sliding of steel against several metals using laser light scattering

✍ V. Martinez-Fuentes; I. Dominguez-Lopez; A.L. Garcia-Garcia 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 827 KB

Previous experimental work has shown the possibility of applying laser light scattering (LLS) methods to study the evolution of surface topography during the initial transient period in a wear experiment on a pin-on disk apparatus. A specific set up of a laser source, pointing towards anywhere on th