✦ LIBER ✦

Warm extrusion of TRIP steels: Process control and tensile properties

✍ Scribed by M. Azrin; G.B. Olson; R.A. Gagne

Book ID: 107827216
Publisher: Elsevier Science
Year: 1979
Weight: 904 KB
Volume: 40
Category: Article
ISSN: 0025-5416
DOI: 10.1016/0025-5416(79)90187-3

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Mechanical properties of carbon and low-

Mechanical properties of carbon and low-alloy steels after warm extrusion

✍ V. I. Doroshko; V. M. Leshchinskii; A. A. Andryushchuk 📂 Article 📅 1976 🏛 Springer US 🌐 English ⚖ 173 KB

Mechanical properties and microstructure

Mechanical properties and microstructure of TRIP steels produced using TSCR process

✍ Yinghui Zhang; Yonli Ma; Yonglin Kang; Hao Yu 📂 Article 📅 2006 🏛 Chinese Electronic Periodical Services 🌐 English ⚖ 472 KB

Effect of warm extrusion on structure an

Effect of warm extrusion on structure and properties of steel 20Kh

✍ V. I. Doroshko; L. I. Kartashova; V. M. Leshchinskii; A. A. Andryushchuk 📂 Article 📅 1976 🏛 Springer US 🌐 English ⚖ 297 KB

Tensile and Plane Bending Fatigue Proper

Tensile and Plane Bending Fatigue Properties of Two TRIP Steels at Room Temperature in the Air—A Comparative Study

✍ M.A. Islam; S. Chen; Y. Tomota 📂 Article 📅 2007 🏛 Springer US 🌐 English ⚖ 616 KB

Microstructural evolution and tensile pr

Microstructural evolution and tensile properties of low-carbon steel with martensitic microstructure during warm deforming and annealing

✍ Yuwei Gao; Tianfu Jing; Guiying Qiao; Jinku Yu; Tiansheng Wang; Qun Li; Xinyu So 📂 Article 📅 2008 🏛 Chinese Electronic Periodical Services 🌐 English ⚖ 514 KB

ANN model for prediction of the effects

ANN model for prediction of the effects of composition and process parameters on tensile strength and percent elongation of Si–Mn TRIP steels

✍ S.M.K. Hosseini; A. Zarei-Hanzaki; M.J. Yazdan Panah; S. Yue 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 351 KB

The effects of composition and intercritical heat treatment parameters on tensile strength and percentage elongation of Si-Mn TRIP steels were modeled, using a neural network with a feed forward topology and a back propagation algorithm. It was found that a committee of nets models the experimental