✦ LIBER ✦

Visualization study on the dynamic mixing quality during single-screw extrusion

✍ Scribed by A. C.-Y. Wong; Y. Lam

Book ID: 106438429
Publisher: Springer
Year: 2007
Tongue: English
Weight: 391 KB
Volume: 15
Category: Article
ISSN: 1022-9760
DOI: 10.1007/s10965-007-9138-2

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Studies on the theory of single screw pl

Studies on the theory of single screw plasticating extrusion. Part I: A new experimental method for extrusion

✍ Fuhua Zhu; Liqin Chen 📂 Article 📅 1991 🏛 Society for Plastic Engineers 🌐 English ⚖ 464 KB

## Abstract An extruder specially designed for the study of the single‐screw plasticating extrusion process was constructed. Its barrel is equipped with glass windows which are located on both sides of it so that the full process of plasticating extrusion, solid conveying, melting, and melt conveyi

Studies on the theory of single screw pl

Studies on the theory of single screw plasticating extrusion. Part II: Non-plug flow solid conveying

✍ Shizeng Fang; Liqin Chen; Fuhua Zhu 📂 Article 📅 1991 🏛 Society for Plastic Engineers 🌐 English ⚖ 491 KB

## Abstract A non‐plug solid conveying theory for plasticating extrusion is proposed in this paper. The polymer granules are treated as‐bulk pellets which move down the screw channel at different speeds, rather than as a plug which never experiences deformation during extrusion. The pellets system

A Case Study on Optimization of Biomass

A Case Study on Optimization of Biomass Flow During Single-Screw Extrusion Cooking Using Genetic Algorithm (GA) and Response Surface Method (RSM)

✍ Tumuluru Jaya Shankar; Shahab Sokhansanj; Sukumar Bandyopadhyay; A. S. Bawa 📂 Article 📅 2008 🏛 Springer-Verlag 🌐 English ⚖ 600 KB

Erratum: A Case Study on Optimization of

Erratum: A Case Study on Optimization of Biomass Flow During Single-Screw Extrusion Cooking Using Genetic Algorithm (GA) and Response Surface Method (RSM)

✍ Tumuluru Jaya Shankar; Shahab Sokhansanj; Sukumar Bandyopadhyay; A. S. Bawa 📂 Article 📅 2010 🏛 Springer-Verlag 🌐 English ⚖ 47 KB

A comparative study on the performance o

A comparative study on the performance of three single-screw elements in melt—melt mixing of immiscible blends

✍ Mohamed Esseghir; Costas G. Gogos; Dong-Woo Yu; David B. Todd; Benny David 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 797 KB

An experimental investigation was conducted to evaluate the performance of three single-screw mixing elements: a Maddock; a Pineapple; and a Twente mixer. The study was designed to focus on the mixers' performance in the mixing of immiscible polymers in the molten state. Two independently controlled