Viscoelastic properties of (cellulose oligo-oxymethylene ether) acylates
✍ Scribed by Toshiro Morooka; Misato Norimoto; Tadashi Yamada; Nobuo Shiraishi
- Publisher
- John Wiley and Sons
- Year
- 1982
- Tongue
- English
- Weight
- 569 KB
- Volume
- 27
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Four kinds of (cellulose oligo‐oxymethylene ether) acylates from the acetate to the valerate were prepared by homogeneous reactions using a DMSO/PF cellulose solvent as the reaction medium. The temperature variations of dynamic modulus, loss modulus, and loss tangent for these polymers were measured. Three types of relaxation process were observed for all (cellulose oligo‐oxymethylene ether) acylates, and an additional relaxation process was detected for (cellulose oligo‐oxymethylene ether) butyrate and valerate. These processes were labelled α, β, γ, and δ in order of decreasing temperature at which they occurred. These α to δ processes were respectively attributed to: micro‐Brownian motion (α), motion of side chains (β), local mode motion involving oxymethylene groups (γ), and motion initiated by three or more methylene groups (δ).
📜 SIMILAR VOLUMES
In the temperature region above the inflection point, plots in transition map for all the acylates were found to be on the same straight line.
## Abstract The viscoelastic properties of regenerated cellulose containing several different softeners or water only were investigated. Measurements of creep and Young's modulus were made on the Instron tensile tester, and the creep curves were fitted to a mechanical model consisting of Voigt and