Repetitive creep and recovery tests in bituminous materials-asphalt and asphalt paving mix are studied at high service temperatures. The non-exponential-stretched exponential type of continuous retardation spectrum is defined and used for the calculation of creep compliance function in repetitive sh
Viscoelastic linearity limits for bituminous materials
โ Scribed by G. D. Airey; B. Rahimzadeh; A. C. Collop
- Publisher
- Springer
- Year
- 2003
- Tongue
- English
- Weight
- 612 KB
- Volume
- 36
- Category
- Article
- ISSN
- 1871-6873
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
A test, replacing the distillation test for pitches, has been developed. In this test, a sample is placed into an aluminium dish which is introduced into the cavity of a metal block preheated to a selected temperature. The surface of the sample is in a constant stream of nitrogen preheated to the te
A simple, inexpensive test measuring the volatility or fuming propensity of bituminous materials with good repeatability has been devised. The test depends on measuring the mass loss which occurs when a small sample of the material is heated in a shallow open dish on a thermostatic hotplate for a fi
Measurements were made of the principal components of the creep compliance tensor in the radial-longitudinal and the ~angential-longitudinal planes of Douglas-fir at 10 percent moisture content. Extensional creep compliance measurements at angles to the grain were also made. The results show that cr