The vibration of linear guideway type (LGT) recirculating linear ball bearing driven at a constant linear velocity was studied. The measurement results of the vibration showed that the overall levels of vibratory velocity of the LGT recirculating linear ball bearings change with the measurement poin
VIBRATIONS OF HYBRID CERAMIC BALL BEARINGS
โ Scribed by H. Ohta; K. Kobayashi
- Publisher
- Elsevier Science
- Year
- 1996
- Tongue
- English
- Weight
- 503 KB
- Volume
- 192
- Category
- Article
- ISSN
- 0022-460X
No coin nor oath required. For personal study only.
โฆ Synopsis
Hybrid ceramic ball bearings with silicone nitride balls and steel rings were tested, and the vibration characteristics were compared with those of conventional steel ball bearings. In this study, two types of hybrid ceramic ball bearings and two types of conventional steel ball bearings were used as test bearings. The test bearings were operated under several rotational speeds and axial loads. The radial and the axial vibrations on the outer ring of each test bearing were detected by an accelerometer. The vibrations were examined by using an FFT analyzer. From the experimental results, analysis and discussion, the vibration characteristics of hybrid ceramic ball bearings, compared with those of conventional steel ball bearings, are explained.
๐ SIMILAR VOLUMES
A dynamic model is derived for misaligned rotor-ball bearing systems driven through a flexible coupling by treating the reaction loads and deformations at the bearing and coupling elements as the misalignment effect. In order to verify the validity of the misaligned rotor system model, experiments a
tested accurately and quickly by the instrument, which until recently was thought to be capable of measuring the thermal conductivity of only such materials as blotting paper, wallboard, glass and all types of insulating materials, John T. Gossett, president, said. Textile manufacturers, he explaine